Как пишется юсб провод

This article is about the computer bus standard. For other uses, see USB (disambiguation).

USB
Universal Serial Bus

Certified USB.svg

Usb connectors.JPG

Upper image: Certified logo.
Lower image: Various USB connectors (From left to right: male Micro USB B-Type, proprietary UC-E6, male Mini USB (5-pin) B-type, female A-type, male A-type, male B-type. Shown with a centimeter ruler.)
Type Bus
Production history
Designer
  • Compaq
  • DEC
  • IBM
  • Intel
  • Microsoft
  • NEC
  • Nortel
Designed January 1996; 27 years ago
Produced Since May 1996[1]
Superseded Serial port, parallel port, game port, Apple Desktop Bus, PS/2 port, and FireWire (IEEE 1394)

Universal Serial Bus (USB) is an industry standard that establishes specifications for cables, connectors and protocols for connection, communication and power supply (interfacing) between computers, peripherals and other computers.[2] A broad variety of USB hardware exists, including 14 different connector types, of which USB-C is the most recent and the only one not currently deprecated since the release of USB 3.2.

First released in 1996, the USB standards are maintained by the USB Implementers Forum (USB-IF). The four generations of USB are: USB 1.x, USB 2.0, USB 3.x, and USB4.[3]

Overview[edit]

USB was designed to standardize the connection of peripherals to personal computers, both to communicate with and to supply electric power. It has largely replaced interfaces such as serial ports and parallel ports and has become commonplace on a wide range of devices. Examples of peripherals that are connected via USB include computer keyboards and mice, video cameras, printers, portable media players, mobile (portable) digital telephones, disk drives, and network adapters.

USB connectors have been increasingly replacing other types as charging cables of portable devices.

Connector type quick reference[edit]

Each USB connection is made using two connectors: a socket (or receptacle) and a plug. In the following table, schematics for only the sockets are shown, although for each there is a corresponding plug (or plugs).

Available sockets by USB standard

Standard USB 1.0
1996 		USB 1.1
1998 		USB 2.0
2001 		USB 2.0
Revised 		USB 3.0
2008 		USB 3.1
2013 		USB 3.2
2017 		USB4
2019 		USB4 V2
2022
Maximum transfer rate 1.5 Mbit/s 12 Mbps 480 Mbps 5 Gbps 10 Gbps 20 Gbps 40 Gbps 80 Gbps
Type A connector USB Type-A receptacle White.svg USB Type-A receptacle Black.svg USB 3.0 Type-A receptacle blue.svg Deprecated
Type B connector USB Type-B receptacle.svg USB 3.0 Type-B receptacle blue.svg Deprecated
Mini-A connector — USB Mini-A receptacle.svg Deprecated
Mini-B connector — USB Mini-B receptacle.svg Deprecated
Mini-AB connector — USB Mini-AB receptacle.svg Deprecated
Micro-A connector — USB 3.0 Micro-A.svg Deprecated
Micro-B connector — USB 3.0 Micro-B receptacle.svg Deprecated
Micro-AB connector — USB Micro-AB receptacle.svg USB micro AB SuperSpeed.png Deprecated
Type C connector Backwards compatibility only USB Type-C Receptacle Pinout.svg
(Enlarged to show detail)

Objectives[edit]

The Universal Serial Bus was developed to simplify and improve the interface between personal computers and peripheral devices, such as cell phones, computer accessories, and monitors, when compared with previously existing standard or ad hoc proprietary interfaces.[4]

From the computer user’s perspective, the USB interface improves ease of use in several ways:

  • The USB interface is self-configuring, eliminating the need for the user to adjust the device’s settings for speed or data format, or configure interrupts, input/output addresses, or direct memory access channels.[5]
  • USB connectors are standardized at the host, so any peripheral can use most available receptacles.
  • USB takes full advantage of the additional processing power that can be economically put into peripheral devices so that they can manage themselves. As such, USB devices often do not have user-adjustable interface settings.
  • The USB interface is hot-swappable (devices can be exchanged without rebooting the host computer).
  • Small devices can be powered directly from the USB interface, eliminating the need for additional power supply cables.
  • Because use of the USB logo is only permitted after compliance testing, the user can have confidence that a USB device will work as expected without extensive interaction with settings and configuration.
  • The USB interface defines protocols for recovery from common errors, improving reliability over previous interfaces.[4]
  • Installing a device that relies on the USB standard requires minimal operator action. When a user plugs a device into a port on a running computer, it either entirely automatically configures using existing device drivers, or the system prompts the user to locate a driver, which it then installs and configures automatically.

The USB standard also provides multiple benefits for hardware manufacturers and software developers, specifically in the relative ease of implementation:

  • The USB standard eliminates the requirement to develop proprietary interfaces to new peripherals.
  • The wide range of transfer speeds available from a USB interface suits devices ranging from keyboards and mice up to streaming video interfaces.
  • A USB interface can be designed to provide the best available latency for time-critical functions or can be set up to do background transfers of bulk data with little impact on system resources.
  • The USB interface is generalized with no signal lines dedicated to only one function of one device.[4]

Limitations[edit]

As with all standards, USB possesses multiple limitations to its design:

  • USB cables are limited in length, as the standard was intended for peripherals on the same table-top, not between rooms or buildings. However, a USB port can be connected to a gateway that accesses distant devices.
  • USB data transfer rates are slower than those of other interconnects such as 100 Gigabit Ethernet.
  • USB has a strict tree network topology and master/slave protocol for addressing peripheral devices; those devices cannot interact with one another except via the host, and two hosts cannot communicate over their USB ports directly. Some extension to this limitation is possible through USB On-The-Go in, Dual-Role-Devices[6] and protocol bridge.
  • A host cannot broadcast signals to all peripherals at once—each must be addressed individually.
  • While converters exist between certain legacy interfaces and USB, they might not provide a full implementation of the legacy hardware. For example, a USB-to-parallel-port converter might work well with a printer, but not with a scanner that requires bidirectional use of the data pins.

For a product developer, using USB requires the implementation of a complex protocol and implies an «intelligent» controller in the peripheral device. Developers of USB devices intended for public sale generally must obtain a USB ID, which requires that they pay a fee to the USB Implementers Forum (USB-IF). Developers of products that use the USB specification must sign an agreement with the USB-IF. Use of the USB logos on the product requires annual fees and membership in the organization.[4]

History[edit]

Large circle is left end of horizontal line. The line forks into three branches ending in circle, triangle and square symbols.

The basic USB trident logo[7]

USB logo on the head of a standard USB-A plug

A group of seven companies began the development of USB in 1995:[8] Compaq, DEC, IBM, Intel, Microsoft, NEC, and Nortel. The goal was to make it fundamentally easier to connect external devices to PCs by replacing the multitude of connectors at the back of PCs, addressing the usability issues of existing interfaces, and simplifying software configuration of all devices connected to USB, as well as permitting greater data transfer rates for external devices and Plug and Play features.[9] Ajay Bhatt and his team worked on the standard at Intel;[10][11] the first integrated circuits supporting USB were produced by Intel in 1995.[12]

As of 2008, about 6 billion USB ports and interfaces were in the global marketplace, and about 2 billion were being sold each year.[13]

USB 1.x[edit]

Released in January 1996, USB 1.0 specified signaling rates of 1.5 Mbit/s (Low Bandwidth or Low Speed) and 12 Mbit/s (Full Speed).[14] It did not allow for extension cables, due to timing and power limitations. Few USB devices made it to the market until USB 1.1 was released in August 1998. USB 1.1 was the earliest revision that was widely adopted and led to what Microsoft designated the «Legacy-free PC».[15][16][17]

Neither USB 1.0 nor 1.1 specified a design for any connector smaller than the standard type A or type B. Though many designs for a miniaturised type B connector appeared on many peripherals, conformity to the USB 1.x standard was hampered by treating peripherals that had miniature connectors as though they had a tethered connection (that is: no plug or receptacle at the peripheral end). There was no known miniature type A connector until USB 2.0 (revision 1.01) introduced one.

USB 2.0[edit]

USB 2.0 was released in April 2000, adding a higher maximum signaling rate of 480 Mbit/s (maximum theoretical data throughput 53 MByte/s[18]) named High Speed or High Bandwidth, in addition to the USB 1.x Full Speed signaling rate of 12 Mbit/s (maximum theoretical data throughput 1.2 MByte/s[19]).

Modifications to the USB specification have been made via engineering change notices (ECNs). The most important of these ECNs are included into the USB 2.0 specification package available from USB.org:[20]

  • Mini-A and Mini-B Connector
  • Micro-USB Cables and Connectors Specification 1.01
  • InterChip USB Supplement
  • On-The-Go Supplement 1.3 USB On-The-Go makes it possible for two USB devices to communicate with each other without requiring a separate USB host
  • Battery Charging Specification 1.1 Added support for dedicated chargers, host chargers behaviour for devices with dead batteries
  • Battery Charging Specification 1.2:[21] with increased current of 1.5 A on charging ports for unconfigured devices, allowing High Speed communication while having a current up to 1.5 A
  • Link Power Management Addendum ECN, which adds a sleep power state

USB 3.x[edit]

The USB 3.0 specification was released on 12 November 2008, with its management transferring from USB 3.0 Promoter Group to the USB Implementers Forum (USB-IF) and announced on 17 November 2008 at the SuperSpeed USB Developers Conference.[22]

USB 3.0 adds a SuperSpeed transfer mode, with associated backward compatible plugs, receptacles, and cables. SuperSpeed plugs and receptacles are identified with a distinct logo and blue inserts in standard format receptacles.

The SuperSpeed bus provides for a transfer mode at a nominal rate of 5.0 Gbit/s, in addition to the three existing transfer modes. Its efficiency is dependent on a number of factors including physical symbol encoding and link level overhead. At a 5 Gbit/s signaling rate with 8b/10b encoding, each byte needs 10 bits to transmit, so the raw throughput is 500 MB/s. When flow control, packet framing and protocol overhead are considered, it is realistic for 400 MB/s (3.2 Gbit/s) or more to transmit to an application.[23]: 4–19  Communication is full-duplex in SuperSpeed transfer mode; earlier modes are half-duplex, arbitrated by the host.[24]

USB-A 3.1 Gen 1 (formerly known as USB 3.0; later renamed USB 3.2 Gen 1×1) ports

Low-power and high-power devices remain operational with this standard, but devices using SuperSpeed can take advantage of increased available current of between 150 mA and 900 mA, respectively.[23]: 9–9 

USB 3.1, released in July 2013 has two variants. The first one preserves USB 3.0’s SuperSpeed transfer mode and is labeled USB 3.1 Gen 1,[25][26] and the second version introduces a new SuperSpeed+ transfer mode under the label of USB 3.1 Gen 2. SuperSpeed+ doubles the maximum data signaling rate to 10 Gbit/s, while reducing line encoding overhead to just 3% by changing the encoding scheme to 128b/132b.[25][27]

USB 3.2, released in September 2017,[28] preserves existing USB 3.1 SuperSpeed and SuperSpeed+ data modes but introduces two new SuperSpeed+ transfer modes over the new USB-C connector with data rates of 10 and 20 Gbit/s (1.25 and 2.5 GB/s). The increase in bandwidth is a result of multi-lane operation over existing wires that were intended for flip-flop capabilities of the USB-C connector.[29]

USB 3.0 also introduced the USB Attached SCSI (UASP) protocol, which provides generally faster transfer speeds than the BOT (Bulk-Only-Transfer) protocol.

Naming scheme[edit]

An overview of old naming scheme for USB 3.2 (deprecated as of September 2022).

Starting with the USB 3.2 standard, USB-IF introduced a new naming scheme.[30] To help companies with branding of the different transfer modes, USB-IF recommended branding the 5, 10, and 20 Gbit/s transfer modes as SuperSpeed USB 5Gbps, SuperSpeed USB 10Gbps, and SuperSpeed USB 20Gbps, respectively.[31] As of September 2022, this naming scheme is deprecated.

USB4[edit]

Main article: USB4

The certified USB4 40Gbps logo

The USB4 40Gbps trident logo

The certified USB4 40Gbps logo and trident logo

The USB4 specification was released on 29 August 2019 by the USB Implementers Forum.[32]

USB4 is based on the Thunderbolt 3 protocol.[33] It supports 40 Gbit/s throughput, is compatible with Thunderbolt 3, and backward compatible with USB 3.2 and USB 2.0.[34][35] The architecture defines a method to share a single high-speed link with multiple end device types dynamically that best serves the transfer of data by type and application.

The USB4 specification states that the following technologies shall be supported by USB4:[32]

Connection Mandatory for Remarks
host hub device
USB 2.0 (480 Mbit/s) Yes Yes Yes Contrary to other functions—which use the multiplexing of high-speed links—USB 2.0 over USB-C utilizes its own differential pair of wires.
USB4 Gen 2×2 (20 Gbit/s) Yes Yes Yes A USB 3.0-labelled device still operates via a USB4 host or hub as a USB 3.0 device. The device requirement of Gen 2×2 applies only to the newcoming USB4-labelled devices.
USB4 Gen 3×2 (40 Gbit/s) No Yes No
DisplayPort Yes Yes No The specification requires that hosts and hubs support the DisplayPort Alternate Mode.
Host-to-Host communications Yes Yes — A LAN-like connection between two peers.
PCI Express No Yes No The PCI Express function of USB4 replicates the functionality of previous versions of the Thunderbolt specification.
Thunderbolt 3 No Yes No Thunderbolt 3 uses USB-C cables; the USB4 specification allows hosts and devices and requires hubs to support interoperability with the standard using the Thunderbolt 3 Alternate Mode.
Other Alternate Modes No No No USB4 products may optionally offer interoperability with the HDMI, MHL, and VirtualLink Alternate Modes.

During CES 2020, USB-IF and Intel stated their intention to allow USB4 products that support all the optional functionality as Thunderbolt 4 products. The first products compatible with USB4 are expected to be Intel’s Tiger Lake series and AMD’s Zen 3 series of CPUs. Released in 2020.

The USB4 2.0 specification was released on 1 September 2022 by the USB Implementers Forum.[36]

September 2022 naming scheme[edit]

An overview of USB naming scheme that was put in place in September 2022.
(A mix of USB specifications and their marketing names are being displayed, because specifications are sometimes wrongly used as marketing names)

Because of the previous confusing naming schemes, USB-IF decided to change it once again. As of 2 September 2022, marketing names follow the syntax «USB XGbps», where X is the speed of transfer in Gb/s.[37] Overview of the updated names and logos can be seen in the adjacent table.

Version history [edit]

Release versions[edit]

Name Release date Maximum transfer rate Note
USB 0.7 11 November 1994 ? Pre-release
USB 0.8 December 1994 ? Pre-release
USB 0.9 13 April 1995 Full Speed (12 Mbit/s) Pre-release
USB 0.99 August 1995 ? Pre-release
USB 1.0-RC November 1995 ? Release Candidate
USB 1.0 15 January 1996 Low Speed (1.5 Mbit/s)

Full Speed (12 Mbit/s)

USB 1.1 August 1998
USB 2.0 April 2000 High Speed (480 Mbit/s)
USB 3.0 November 2008 SuperSpeed USB (5 Gbit/s) Also referred to as USB 3.1 Gen 1[25] and USB 3.2 Gen 1 × 1
USB 3.1 July 2013 SuperSpeed+ USB (10 Gbit/s) Includes new USB 3.1 Gen 2,[25] also named USB 3.2 Gen 2 × 1 in later specifications. Last version to support Type A connector.
USB 3.2 August 2017 SuperSpeed+ USB dual-lane (20 Gbit/s) Includes new USB 3.2 Gen 1 × 2 and Gen 2 × 2 multi-link modes.[38] Requires Type C connector.
USB4 August 2019 40 Gbit/s (2-lane) Includes new USB4 Gen 2 × 2 (64b/66b encoding) and Gen 3 × 2 (128b/132b encoding) modes and introduces USB4 routing for tunnelling of USB3.x, DisplayPort 1.4a and PCI Express traffic and host-to-host transfers, based on the Thunderbolt 3 protocol
USB4 2.0 September 2022 120 Gbit/s Includes new 80 and 120 Gbit/s modes over Type C connector[39]

Power-related standards[edit]

Release name Release date Max. power Note
USB Battery Charging Rev. 1.0 2007-03-08 7.5 W (5 V, 1.5 A)
USB Battery Charging Rev. 1.1 2009-04-15 7.5 W (5 V, 1.5 A) Page 28, Table 5–2, but with limitation on paragraph 3.5. In ordinary USB 2.0’s standard-A port, 1.5 A only.[40]
USB Battery Charging Rev. 1.2 2010-12-07 7.5 W (5 V, 1.5 A) [41]
USB Power Delivery Rev. 1.0 (V. 1.0) 2012-07-05 100 W (20 V, 5 A) Using FSK protocol over bus power (VBUS)
USB Power Delivery Rev. 1.0 (V. 1.3) 2014-03-11 100 W (20 V, 5 A)
USB Type-C Rev. 1.0 2014-08-11 15 W (5 V, 3 A) New connector and cable specification
USB Power Delivery Rev. 2.0 (V. 1.0) 2014-08-11 100 W (20 V, 5 A) Using BMC protocol over communication channel (CC) on USB-C cables.
USB Type-C Rev. 1.1 2015-04-03 15 W (5 V, 3 A)
USB Power Delivery Rev. 2.0 (V. 1.1) 2015-05-07 100 W (20 V, 5 A)
USB Type-C Rev. 1.2 2016-03-25 15 W (5 V, 3 A)
USB Power Delivery Rev. 2.0 (V. 1.2) 2016-03-25 100 W (20 V, 5 A)
USB Power Delivery Rev. 2.0 (V. 1.3) 2017-01-12 100 W (20 V, 5 A)
USB Power Delivery Rev. 3.0 (V. 1.1) 2017-01-12 100 W (20 V, 5 A)
USB Type-C Rev. 1.3 2017-07-14 15 W (5 V, 3 A)
USB Power Delivery Rev. 3.0 (V. 1.2) 2018-06-21 100 W (20 V, 5 A)
USB Type-C Rev. 1.4 2019-03-29 15 W (5 V, 3 A)
USB Type-C Rev. 2.0 2019-08-29 15 W (5 V, 3 A) Enabling USB4 over USB Type-C connectors and cables.
USB Power Delivery Rev. 3.0 (V. 2.0) 2019-08-29 100 W (20 V, 5 A) [42]
USB Power Delivery Rev. 3.1 (V. 1.0) 2021-05-24 240 W (48 V, 5 A)
USB Type-C Rev. 2.1 2021-05-25 15 W (5 V, 3 A) [43]
USB Power Delivery Rev. 3.1 (V. 1.1) 2021-07-06 240 W (48 V, 5 A) [44]
USB Power Delivery Rev. 3.1 (V. 1.2) 2021-10-26 240 W (48 V, 5 A) Including errata through October 2021[44]

This version incorporates the following ECNs:

  • Clarify use of Retries
  • Battery Capabilities
  • FRS timing problem
  • PPS power rule clarifications
  • Peak current support for EPR AVS APDO

System design[edit]

A USB system consists of a host with one or more downstream ports, and multiple peripherals, forming a tiered-star topology. Additional USB hubs may be included, allowing up to five tiers. A USB host may have multiple controllers, each with one or more ports. Up to 127 devices may be connected to a single host controller.[45][23]: 8–29  USB devices are linked in series through hubs. The hub built into the host controller is called the root hub.

A USB device may consist of several logical sub-devices that are referred to as device functions. A composite device may provide several functions, for example, a webcam (video device function) with a built-in microphone (audio device function). An alternative to this is a compound device, in which the host assigns each logical device a distinct address and all logical devices connect to a built-in hub that connects to the physical USB cable.

Diagram: inside a device are several endpoints, each of which connects by a logical pipe to a host controller. Data in each pipe flows in one direction, though there are a mixture going to and from the host controller.

USB endpoints reside on the connected device: the channels to the host are referred to as pipes.

USB device communication is based on pipes (logical channels). A pipe is a connection from the host controller to a logical entity within a device, called an endpoint. Because pipes correspond to endpoints, the terms are sometimes used interchangeably. Each USB device can have up to 32 endpoints (16 in and 16 out), though it is rare to have so many. Endpoints are defined and numbered by the device during initialization (the period after physical connection called «enumeration») and so are relatively permanent, whereas pipes may be opened and closed.

There are two types of pipe: stream and message.

  • A message pipe is bi-directional and is used for control transfers. Message pipes are typically used for short, simple commands to the device, and for status responses from the device, used, for example, by the bus control pipe number 0.
  • A stream pipe is a uni-directional pipe connected to a uni-directional endpoint that transfers data using an isochronous,[46] interrupt, or bulk transfer:
    Isochronous transfers
    At some guaranteed data rate (for fixed-bandwidth streaming data) but with possible data loss (e.g., realtime audio or video)
    Interrupt transfers
    Devices that need guaranteed quick responses (bounded latency) such as pointing devices, mice, and keyboards
    Bulk transfers
    Large sporadic transfers using all remaining available bandwidth, but with no guarantees on bandwidth or latency (e.g., file transfers)

When a host starts a data transfer, it sends a TOKEN packet containing an endpoint specified with a tuple of (device_address, endpoint_number). If the transfer is from the host to the endpoint, the host sends an OUT packet (a specialization of a TOKEN packet) with the desired device address and endpoint number. If the data transfer is from the device to the host, the host sends an IN packet instead. If the destination endpoint is a uni-directional endpoint whose manufacturer’s designated direction does not match the TOKEN packet (e.g. the manufacturer’s designated direction is IN while the TOKEN packet is an OUT packet), the TOKEN packet is ignored. Otherwise, it is accepted and the data transaction can start. A bi-directional endpoint, on the other hand, accepts both IN and OUT packets.

Rectangular opening where the width is twice the height. The opening has a metal rim, and within the opening a flat rectangular bar runs parallel to the top side.

Two USB 3.0 Standard-A receptacles (left) and two USB 2.0 Standard-A receptacles (right) on a computer’s front panel

Endpoints are grouped into interfaces and each interface is associated with a single device function. An exception to this is endpoint zero, which is used for device configuration and is not associated with any interface. A single device function composed of independently controlled interfaces is called a composite device. A composite device only has a single device address because the host only assigns a device address to a function.

When a USB device is first connected to a USB host, the USB device enumeration process is started. The enumeration starts by sending a reset signal to the USB device. The data rate of the USB device is determined during the reset signaling. After reset, the USB device’s information is read by the host and the device is assigned a unique 7-bit address. If the device is supported by the host, the device drivers needed for communicating with the device are loaded and the device is set to a configured state. If the USB host is restarted, the enumeration process is repeated for all connected devices.

The host controller directs traffic flow to devices, so no USB device can transfer any data on the bus without an explicit request from the host controller. In USB 2.0, the host controller polls the bus for traffic, usually in a round-robin fashion. The throughput of each USB port is determined by the slower speed of either the USB port or the USB device connected to the port.

High-speed USB 2.0 hubs contain devices called transaction translators that convert between high-speed USB 2.0 buses and full and low speed buses. There may be one translator per hub or per port.

Because there are two separate controllers in each USB 3.0 host, USB 3.0 devices transmit and receive at USB 3.0 data rates regardless of USB 2.0 or earlier devices connected to that host. Operating data rates for earlier devices are set in the legacy manner.

Device classes[edit]

The functionality of a USB device is defined by a class code sent to a USB host. This allows the host to load software modules for the device and to support new devices from different manufacturers.

Device classes include:[47]

Class Usage Description Examples, or exception
00h Device Unspecified[48] Device class is unspecified, interface descriptors are used to determine needed drivers
01h Interface Audio Speaker, microphone, sound card, MIDI
02h Both Communications and CDC control UART and RS-232 serial adapter, Modem, Wi-Fi adapter, Ethernet adapter. Used together with class 0Ah (CDC-Data) below
03h Interface Human interface device (HID) Keyboard, mouse, joystick
05h Interface Physical interface device (PID) Force feedback joystick
06h Interface Media (PTP/MTP) Scanner, Camera
07h Interface Printer Laser printer, inkjet printer, CNC machine
08h Interface USB mass storage, USB Attached SCSI USB flash drive, memory card reader, digital audio player, digital camera, external drive
09h Device USB hub High speed USB hub
0Ah Interface CDC-Data Used together with class 02h (Communications and CDC Control) above
0Bh Interface Smart Card USB smart card reader
0Dh Interface Content security Fingerprint reader
0Eh Interface Video Webcam
0Fh Interface Personal healthcare device class (PHDC) Pulse monitor (watch)
10h Interface Audio/Video (AV) Webcam, TV
11h Device Billboard Describes USB-C alternate modes supported by device
DCh Both Diagnostic device USB compliance testing device
E0h Interface Wireless Controller Bluetooth adapter, Microsoft RNDIS
EFh Both Miscellaneous ActiveSync device
FEh Interface Application-specific IrDA Bridge, Test & Measurement Class (USBTMC),[49] USB DFU (Device Firmware Upgrade)[50]
FFh Both Vendor-specific Indicates that a device needs vendor-specific drivers

USB mass storage / USB drive[edit]

An M.2 (2242) solid-state-drive (SSD) connected into USB 3.0 adapter and connected to computer.

The USB mass storage device class (MSC or UMS) standardizes connections to storage devices. At first intended for magnetic and optical drives, it has been extended to support flash drives and SD card readers. The ability to boot a write-locked SD card with a USB adapter is particularly advantageous for maintaining the integrity and non-corruptible, pristine state of the booting medium.

Though most personal computers since early 2005 can boot from USB mass storage devices, USB is not intended as a primary bus for a computer’s internal storage. However, USB has the advantage of allowing hot-swapping, making it useful for mobile peripherals, including drives of various kinds.

Several manufacturers offer external portable USB hard disk drives, or empty enclosures for disk drives. These offer performance comparable to internal drives, limited by the number and types of attached USB devices, and by the upper limit of the USB interface. Other competing standards for external drive connectivity include eSATA, ExpressCard, FireWire (IEEE 1394), and most recently Thunderbolt.

Another use for USB mass storage devices is the portable execution of software applications (such as web browsers and VoIP clients) with no need to install them on the host computer.[51][52]

Media Transfer Protocol[edit]

Media Transfer Protocol (MTP) was designed by Microsoft to give higher-level access to a device’s filesystem than USB mass storage, at the level of files rather than disk blocks. It also has optional DRM features. MTP was designed for use with portable media players, but it has since been adopted as the primary storage access protocol of the Android operating system from the version 4.1 Jelly Bean as well as Windows Phone 8 (Windows Phone 7 devices had used the Zune protocol – an evolution of MTP). The primary reason for this is that MTP does not require exclusive access to the storage device the way UMS does, alleviating potential problems should an Android program request the storage while it is attached to a computer. The main drawback is that MTP is not as well supported outside of Windows operating systems.

Human interface devices[edit]

USB mice and keyboards can usually be used with older computers that have PS/2 connectors with the aid of a small USB-to-PS/2 adapter. For mice and keyboards with dual-protocol support, an adaptor that contains no logic circuitry may be used: the USB hardware in the keyboard or mouse is designed to detect whether it is connected to a USB or PS/2 port, and communicate using the appropriate protocol. Converters that connect PS/2 keyboards and mice (usually one of each) to a USB port also exist.[53] These devices present two HID endpoints to the system and use a microcontroller to perform bidirectional data translation between the two standards.

Device Firmware Upgrade mechanism[edit]

Device Firmware Upgrade (DFU) is a vendor- and device-independent mechanism for upgrading the firmware of USB devices with improved versions provided by their manufacturers, offering (for example) a way to deploy firmware bug fixes. During the firmware upgrade operation, USB devices change their operating mode effectively becoming a PROM programmer. Any class of USB device can implement this capability by following the official DFU specifications.[50][54][55]

DFU can also give the user the freedom to flash USB devices with alternative firmware. One consequence of this is that USB devices after being re-flashed may act as various unexpected device types. For example, a USB device that the seller intends to be just a flash drive can «spoof» an input device like a keyboard. See BadUSB.[56]

Audio streaming[edit]

The USB Device Working Group has laid out specifications for audio streaming, and specific standards have been developed and implemented for audio class uses, such as microphones, speakers, headsets, telephones, musical instruments, etc. The working group has published three versions of audio device specifications:[57][58] USB Audio 1.0, 2.0, and 3.0, referred to as «UAC»[59] or «ADC».[60]

UAC 3.0 primarily introduces improvements for portable devices, such as reduced power usage by bursting the data and staying in low power mode more often, and power domains for different components of the device, allowing them to be shut down when not in use.[61]

UAC 2.0 introduced support for High Speed USB (in addition to Full Speed), allowing greater bandwidth for multi-channel interfaces, higher sample rates,[62] lower inherent latency,[63][59] and 8× improvement in timing resolution in synchronous and adaptive modes.[59] UAC2 also introduced the concept of clock domains, which provides information to the host about which input and output terminals derive their clocks from the same source, as well as improved support for audio encodings like DSD, audio effects, channel clustering, user controls, and device descriptions.[59][64]

UAC 1.0 devices are still common, however, due to their cross-platform driverless compatibility,[62] and also partly due to Microsoft’s failure to implement UAC 2.0 for over a decade after its publication, having finally added support to Windows 10 through the Creators Update on 20 March 2017.[65][66][64] UAC 2.0 is also supported by macOS, iOS, and Linux,[59] however Android only implements a subset of the UAC 1.0 specification.[67]

USB provides three isochronous (fixed-bandwidth) synchronization types,[68] all of which are used by audio devices:[69]

  • Asynchronous – The ADC or DAC are not synced to the host computer’s clock at all, operating off a free-running clock local to the device.
  • Synchronous – The device’s clock is synced to the USB start-of-frame (SOF) or Bus Interval signals. For instance, this can require syncing an 11.2896 MHz clock to a 1 kHz SOF signal, a large frequency multiplication.[70][71]
  • Adaptive – The device’s clock is synced to the amount of data sent per frame by the host[72]

While the USB spec originally described asynchronous mode being used in «low cost speakers» and adaptive mode in «high-end digital speakers»,[73] the opposite perception exists in the hi-fi world, where asynchronous mode is advertised as a feature, and adaptive/synchronous modes have a bad reputation.[74][75][67] In reality, all types can be high-quality or low-quality, depending on the quality of their engineering and the application.[71][59][76] Asynchronous has the benefit of being untied from the computer’s clock, but the disadvantage of requiring sample rate conversion when combining multiple sources.

Connectors[edit]

The connectors the USB committee specifies support a number of USB’s underlying goals, and reflect lessons learned from the many connectors the computer industry has used. The female connector mounted on the host or device is called the receptacle, and the male connector attached to the cable is called the plug.[23]: 2–5 – 2–6  The official USB specification documents also periodically define the term male to represent the plug, and female to represent the receptacle.[77]

USB Type-A plug

The standard USB Type-A plug. This is one of many types of USB connector.

The design is intended to make it difficult to insert a USB plug into its receptacle incorrectly. The USB specification requires that the cable plug and receptacle be marked so the user can recognize the proper orientation.[23] The USB-C plug however is reversible. USB cables and small USB devices are held in place by the gripping force from the receptacle, with no screws, clips, or thumb-turns as some connectors use.

The different A and B plugs prevent accidentally connecting two power sources. However, some of this directed topology is lost with the advent of multi-purpose USB connections (such as USB On-The-Go in smartphones, and USB-powered Wi-Fi routers), which require A-to-A, B-to-B, and sometimes Y/splitter cables.

USB connector types multiplied as the specification progressed. The original USB specification detailed standard-A and standard-B plugs and receptacles. The connectors were different so that users could not connect one computer receptacle to another. The data pins in the standard plugs are recessed compared to the power pins, so that the device can power up before establishing a data connection. Some devices operate in different modes depending on whether the data connection is made. Charging docks supply power and do not include a host device or data pins, allowing any capable USB device to charge or operate from a standard USB cable. Charging cables provide power connections, but not data. In a charge-only cable, the data wires are shorted at the device end, otherwise the device may reject the charger as unsuitable.

Cabling[edit]

A variety of USB cables for sale in Hong Kong

The USB 1.1 standard specifies that a standard cable can have a maximum length of 5 meters (16 ft 5 in) with devices operating at full speed (12 Mbit/s), and a maximum length of 3 meters (9 ft 10 in) with devices operating at low speed (1.5 Mbit/s).[78][79][80]

USB 2.0 provides for a maximum cable length of 5 meters (16 ft 5 in) for devices running at high speed (480 Mbit/s).[80]

The USB 3.0 standard does not directly specify a maximum cable length, requiring only that all cables meet an electrical specification: for copper cabling with AWG 26 wires the maximum practical length is 3 meters (9 ft 10 in).[81]

USB bridge cables[edit]

USB bridge cables, or data transfer cables can be found within the market, offering direct PC to PC connections. A bridge cable is a special cable with a chip and active electronics in the middle of the cable. The chip in the middle of the cable acts as a peripheral to both computers and allows for peer-to-peer communication between the computers. The USB bridge cables are used to transfer files between two computers via their USB ports.

Popularized by Microsoft as Windows Easy Transfer, the Microsoft utility used a special USB bridge cable to transfer personal files and settings from a computer running an earlier version of Windows to a computer running a newer version. In the context of the use of Windows Easy Transfer software, the bridge cable can sometimes be referenced as Easy Transfer cable.

Many USB bridge / data transfer cables are still USB 2.0, but there are also a number of USB 3.0 transfer cables. Despite USB 3.0 being 10 times faster than USB 2.0, USB 3.0 transfer cables are only 2 — 3 times faster given their design.[clarification needed]

The USB 3.0 specification introduced an A-to-A cross-over cable without power for connecting two PCs. These are not meant for data transfer but are aimed at diagnostic uses.

Dual-role USB connections[edit]

USB bridge cables have become less important with USB dual-role-device capabilities introduced with the USB 3.1 specification. Under the most recent specifications, USB supports most scenarios connecting systems directly with a Type-C cable. For the capability to work, however, connected systems must support role-switching. Dual-role capabilities requires there be two controllers within the system, as well as a role controller. While this can be expected in a mobile platform such as a tablet or a phone, desktop PCs and laptops often will not support dual roles.[82]

Power[edit]

Upstream USB connectors supply power at a nominal 5V DC via the V_BUS pin to downstream USB devices.

Low-power and high-power devices[edit]

Low-power devices may draw at most 1-unit load, and all devices must act as low-power devices when starting out as unconfigured. 1 unit load is 100 mA for USB devices up to USB 2.0, while USB 3.0 defines a unit load as 150 mA.

High-power devices (such as a typical 2.5-inch USB hard disk drive) draw at least 1 unit load and at most 5-unit loads (5x100mA = 500 mA) for devices up to USB 2.0- or 6-unit loads (6x150mA= 900 mA) for SuperSpeed (USB 3.0 and up) devices.

USB power standards

Specification Current Voltage Power (max.)
Low-power device 100 mA 5 V[a] 0.50 W
Low-power SuperSpeed (USB 3.0) device 150 mA 5 V[a] 0.75 W
High-power device 500 mA[b] 5 V 2.5 W
High-power SuperSpeed (USB 3.0) device 900 mA[c] 5 V 4.5 W
Multi-lane SuperSpeed (USB 3.2 Gen 2) device 1.5 A[d] 5 V 7.5 W
Battery Charging (BC) 1.1 1.5 A 5 V 7.5 W
Battery Charging (BC) 1.2 1.5 A 5 V 7.5 W
USB-C 1.5 A 5 V 7.5 W
3 A 5 V 15 W
Power Delivery 1.0/2.0/3.0 Type-C 5 A[e] 20 V 100 W
Power Delivery 3.1 Type-C 5 A[e] 48 V[f] 240 W
  1. ^ a b The VBUS supply from a low-powered hub port may drop to 4.40 V.
  2. ^ Up to five unit loads; with non-SuperSpeed devices, one unit load is 100 mA.
  3. ^ Up to six unit loads; with SuperSpeed devices, one unit load is 150 mA.
  4. ^ Up to six unit loads; with multi-lane devices, one unit load is 250 mA.
  5. ^ a b >3 A (>60 W) operation requires an electronically marked cable rated at 5 A.
  6. ^ >20 V (>100 W) operation requires an electronically marked Extended Power Range (EPR) cable.

To recognize Battery Charging mode, a dedicated charging port places a resistance not exceeding 200 Ω across the D+ and D− terminals. Shorted or near-shorted data lanes with less than 200 Ω of resistance across the «D+» and «D−» terminals signify a dedicated charging port (DCP) with indefinite charging rates.[83][84]

In addition to standard USB, there is a proprietary high-powered system known as PoweredUSB, developed in the 1990s, and mainly used in point-of-sale terminals such as cash registers.

Signaling[edit]

USB signals are transmitted using differential signaling on a twisted-pair data wires with 90 Ω ± 15% characteristic impedance.[85] USB 2.0 and earlier specifications define a single pair in half-duplex (HDx). USB 3.0 and later specifications define one pair for USB 2.0 compatibility and two or four pairs for data transfer: two pairs in full-duplex (FDx) for single lane variants (requires SuperSpeed connectors); four pairs in full-duplex for dual lane (×2) variants (requires USB-C connector).

Rate Name Old Name First publication (Standard) Encoding Data pairs Nominal
Rate 		USB-IF Marketing
Name[86][87][88] 		Logo
Low-Speed USB 1.0 NRZI 1 HDx 1.5 Mbit/s Basic-Speed USB USB icon.svg
Full-Speed 12 Mbit/s
High-Speed USB 2.0 480 Mbit/s Hi-Speed USB
USB 3.2 Gen 1×1 USB 3.0;
USB 3.1 Gen 1 		USB 3.0 8b/10b 2 FDx 5 Gbit/s SuperSpeed USB 5Gbps USB SuperSpeed 5 Gbps Trident Logo.svg
USB 3.2 Gen 2×1 USB 3.1 Gen 2 USB 3.1 128b/132b 2 FDx 10 Gbit/s SuperSpeed USB 10Gbps USB SuperSpeed 10 Gbps Trident Logo.svg
USB 3.2 Gen 1×2 USB 3.2 8b/10b 4 FDx ×2 10 Gbit/s —
USB 3.2 Gen 2×2 128b/132b 4 FDx ×2 20 Gbit/s SuperSpeed USB 20Gbps USB SuperSpeed 20 Gbps Trident Logo.svg
USB4 Gen 2×1 USB4 64b/66b[a] 2 FDx 10 Gbit/s —
USB4 Gen 2×2 64b/66b[a] 4 FDx ×2 20 Gbit/s USB4 20Gbps USB4 20Gbps Logo.svg
USB4 Gen 3×1 128b/132b[a] 2 FDx 20 Gbit/s —
USB4 Gen 3×2 128b/132b[a] 4 FDx ×2 40 Gbit/s USB4 40Gbps USB4 40Gbps Logo.svg
  1. ^ a b c d USB4 can use optional Reed–Solomon forward error correction (RS FEC). In this mode, 12 × 16 B (128 bit) symbols are assembled together with 2 B (12 bit + 4 bit reserved) synchronisation bits indicating the respective symbol types and 4 B of RS FEC to allow to correct up to 1 B of errors anywhere in the total 198 B block.
  • Low-speed (LS) and Full-speed (FS) modes use a single data pair, labelled D+ and D−, in half-duplex. Transmitted signal levels are 0.0–0.3 V for logical low, and 2.8–3.6 V for logical high level. The signal lines are not terminated.
  • High-speed (HS) mode uses the same wire pair, but with different electrical conventions. Lower signal voltages of −10 to 10 mV for low and 360 to 440 mV for logical high level, and termination of 45 Ω to ground or 90 Ω differential to match the data cable impedance.
  • SuperSpeed (SS) adds two additional pairs of shielded twisted wire (and new, mostly compatible expanded connectors). These are dedicated to full-duplex SuperSpeed operation. The SuperSpeed link operates independently from USB 2.0 channel and takes a precedence on connection. Link configuration is performed using LFPS (Low Frequency Periodic Signaling, approximately at 20 MHz frequency), and electrical features include voltage de-emphasis at transmitter side, and adaptive linear equalization on receiver side to combat electrical losses in transmission lines, and thus the link introduces the concept of link training.
  • SuperSpeed+ (SS+) uses increased data rate (Gen 2×1 mode) and/or the additional lane in the USB-C connector (Gen 1×2 and Gen 2×2 mode).

A USB connection is always between a host or hub at the A connector end, and a device or hub’s «upstream» port at the other end.

Protocol layer[edit]

During USB communication, data is transmitted as packets. Initially, all packets are sent from the host via the root hub, and possibly more hubs, to devices. Some of those packets direct a device to send some packets in reply.

Transactions[edit]

The basic transactions of USB are:

  • OUT transaction
  • IN transaction
  • SETUP transaction
  • Control transfer exchange

Related standards[edit]

Media Agnostic USB[edit]

The USB Implementers Forum introduced the Media Agnostic USB (MA-USB) v.1.0 wireless communication standard based on the USB protocol on July 29, 2015. Wireless USB is a cable-replacement technology, and uses ultra-wideband wireless technology for data rates of up to 480 Mbit/s.[89]

The USB-IF used WiGig Serial Extension v1.2 specification as its initial foundation for the MA-USB specification and is compliant with SuperSpeed USB (3.0 and 3.1) and Hi-Speed USB (USB 2.0). Devices that use MA-USB will be branded as ‘Powered by MA-USB’, provided the product qualifies its certification program.[90]

InterChip USB[edit]

InterChip USB is a chip-to-chip variant that eliminates the conventional transceivers found in normal USB. The HSIC physical layer uses about 50% less power and 75% less board area compared to USB 2.0.[91] It is an alternative standard to SPI and I2C.

USB-C[edit]

USB-C (officially USB Type-C) is a standard that defines a new connector, and several new connection features. Among them it supports Alternate Mode, which allows transporting other protocols via the USB-C connector and cable. This is commonly used to support the DisplayPort or HDMI protocols, which allows connecting a display, such as a computer monitor or television set, via USB-C.

All other connectors were deprecated in USB 3.2.[92]

DisplayLink[edit]

DisplayLink is a technology which allows multiple displays to be connected to a computer via USB. It was introduced around 2006, and before the advent of Alternate Mode over USB-C it was the only way to connect displays via USB. It is a proprietary technology, not standardized by the USB Implementers Forum and typically requires a separate device driver on the computer.

Comparisons with other connection methods[edit]

IEEE 1394[edit]

At first, USB was considered a complement to IEEE 1394 (FireWire) technology, which was designed as a high-bandwidth serial bus that efficiently interconnects peripherals such as disk drives, audio interfaces, and video equipment. In the initial design, USB operated at a far lower data rate and used less sophisticated hardware. It was suitable for small peripherals such as keyboards and pointing devices.

The most significant technical differences between FireWire and USB include:

  • USB networks use a tiered-star topology, while IEEE 1394 networks use a tree topology.
  • USB 1.0, 1.1, and 2.0 use a «speak-when-spoken-to» protocol, meaning that each peripheral communicates with the host when the host specifically requests it to communicate. USB 3.0 allows for device-initiated communications towards the host. A FireWire device can communicate with any other node at any time, subject to network conditions.
  • A USB network relies on a single host at the top of the tree to control the network. All communications are between the host and one peripheral. In a FireWire network, any capable node can control the network.
  • USB runs with a 5 V power line, while FireWire supplies 12 V and theoretically can supply up to 30 V.
  • Standard USB hub ports can provide from the typical 500 mA/2.5 W of current, only 100 mA from non-hub ports. USB 3.0 and USB On-The-Go supply 1.8 A/9.0 W (for dedicated battery charging, 1.5 A/7.5 W full bandwidth or 900 mA/4.5 W high bandwidth), while FireWire can in theory supply up to 60 watts of power, although 10 to 20 watts is more typical.

These and other differences reflect the differing design goals of the two buses: USB was designed for simplicity and low cost, while FireWire was designed for high performance, particularly in time-sensitive applications such as audio and video. Although similar in theoretical maximum transfer rate, FireWire 400 is faster than USB 2.0 high-bandwidth in real-use,[93] especially in high-bandwidth use such as external hard drives.[94][95][96][97] The newer FireWire 800 standard is twice as fast as FireWire 400 and faster than USB 2.0 high-bandwidth both theoretically and practically.[98] However, FireWire’s speed advantages rely on low-level techniques such as direct memory access (DMA), which in turn have created opportunities for security exploits such as the DMA attack.

The chipset and drivers used to implement USB and FireWire have a crucial impact on how much of the bandwidth prescribed by the specification is achieved in the real world, along with compatibility with peripherals.[99]

Ethernet[edit]

The IEEE 802.3af, 802.3at, and 802.3bt Power over Ethernet (PoE) standards specify more elaborate power negotiation schemes than powered USB. They operate at 48 V DC and can supply more power (up to 12.95 W for 802.3af, 25.5 W for 802.3at aka PoE+, 71 W for 802.3bt aka 4PPoE) over a cable up to 100 meters compared to USB 2.0, which provides 2.5 W with a maximum cable length of 5 meters. This has made PoE popular for VoIP telephones, security cameras, wireless access points, and other networked devices within buildings. However, USB is cheaper than PoE provided that the distance is short and power demand is low.

Ethernet standards require electrical isolation between the networked device (computer, phone, etc.) and the network cable up to 1500 V AC or 2250 V DC for 60 seconds.[100] USB has no such requirement as it was designed for peripherals closely associated with a host computer, and in fact it connects the peripheral and host grounds. This gives Ethernet a significant safety advantage over USB with peripherals such as cable and DSL modems connected to external wiring that can assume hazardous voltages under certain fault conditions.[101][102]

MIDI[edit]

The USB Device Class Definition for MIDI Devices transmits Music Instrument Digital Interface (MIDI) music data over USB.[103] The MIDI capability is extended to allow up to sixteen simultaneous virtual MIDI cables, each of which can carry the usual MIDI sixteen channels and clocks.

USB is competitive for low-cost and physically adjacent devices. However, Power over Ethernet and the MIDI plug standard have an advantage in high-end devices that may have long cables. USB can cause ground loop problems between equipment, because it connects ground references on both transceivers. By contrast, the MIDI plug standard and Ethernet have built-in isolation to 500V or more.

eSATA/eSATAp[edit]

The eSATA connector is a more robust SATA connector, intended for connection to external hard drives and SSDs. eSATA’s transfer rate (up to 6 Gbit/s) is similar to that of USB 3.0 (up to 5 Gbit/s) and USB 3.1 (up to 10 Gbit/s). A device connected by eSATA appears as an ordinary SATA device, giving both full performance and full compatibility associated with internal drives.

eSATA does not supply power to external devices. This is an increasing disadvantage compared to USB. Even though USB 3.0’s 4.5 W is sometimes insufficient to power external hard drives, technology is advancing, and external drives gradually need less power, diminishing the eSATA advantage. eSATAp (power over eSATA; aka ESATA/USB) is a connector introduced in 2009 that supplies power to attached devices using a new, backward compatible, connector. On a notebook eSATAp usually supplies only 5 V to power a 2.5-inch HDD/SSD; on a desktop workstation it can additionally supply 12 V to power larger devices including 3.5-inch HDD/SSD and 5.25-inch optical drives.

eSATAp support can be added to a desktop machine in the form of a bracket connecting the motherboard SATA, power, and USB resources.

eSATA, like USB, supports hot plugging, although this might be limited by OS drivers and device firmware.

Thunderbolt[edit]

Thunderbolt combines PCI Express and Mini DisplayPort into a new serial data interface. Original Thunderbolt implementations have two channels, each with a transfer speed of 10 Gbit/s, resulting in an aggregate unidirectional bandwidth of 20 Gbit/s.[104]

Thunderbolt 2 uses link aggregation to combine the two 10 Gbit/s channels into one bidirectional 20 Gbit/s channel.[105]

Thunderbolt 3 uses the USB-C connector.[106][107][108] Thunderbolt 3 has two physical 20 Gbit/s bi-directional channels, aggregated to appear as a single logical 40 Gbit/s bi-directional channel. Thunderbolt 3 controllers can incorporate a USB 3.1 Gen 2 controller to provide compatibility with USB devices. They are also capable of providing DisplayPort alternate mode over the USB-C connector, making a Thunderbolt 3 port a superset of a USB 3.1 Gen 2 port with DisplayPort alternate mode.

DisplayPort Alt Mode 2.0: USB 4 supports DisplayPort 2.0 over its alternative mode. DisplayPort 2.0 can support 8K resolution at 60 Hz with HDR10 color.[109] DisplayPort 2.0 can use up to 80 Gbit/s, which is double the amount available to USB data, because it sends all the data in one direction (to the monitor) and can thus use all eight data lanes at once.[109]

After the specification was made royalty-free and custodianship of the Thunderbolt protocol was transferred from Intel to the USB Implementers Forum, Thunderbolt 3 has been effectively implemented in the USB4 specification—with compatibility with Thunderbolt 3 optional but encouraged for USB4 products.[110]

Interoperability[edit]

Various protocol converters are available that convert USB data signals to and from other communications standards.

Security threats[edit]

Due to the prevalency of the USB standard, there are many exploits using the USB standard. One of the biggest instances of this today is known as the USB Killer, a device which damages devices by sending high voltage pulses across the data lines.

In versions of Microsoft Windows before Windows XP, Windows would automatically run a script (if present) on certain devices via autorun, one of which are USB mass storage devices, which may contain malicious software.[111]

See also[edit]

USB[edit]

  • USB hardware
  • USB protocol
  • USB-C
  • USB hub
  • Extensible Host Controller Interface (XHCI)
  • List of device bit rates#Peripheral
  • WebUSB

Derived and related standards[edit]

  • DockPort
  • Windows Easy Transfer
  • LIO Target
  • Media Transfer Protocol
  • Mobile High-Definition Link
  • Thunderbolt (interface)

References[edit]

  1. ^ «82371FB (PIIX) and 82371SB (PIIX3) PCI ISA IDE Xcelerator» (PDF). Intel. May 1996. Archived from the original (PDF) on 13 March 2016. Retrieved 12 March 2016.
  2. ^ «USB deserves more support». Business. Boston Globe Online. Simson. 31 December 1995. Archived from the original on 6 April 2012. Retrieved 12 December 2011.
  3. ^ Hachman, Mark (4 March 2019). «The new USB4 spec promises a lot: Thunderbolt 3 support, 40Gbps bandwidth, and less confusion». PCWorld. Archived from the original on 27 March 2019. Retrieved 4 March 2019.
  4. ^ a b c d Jan Axelson, USB Complete: The Developer’s Guide, Fifth Edition, Lakeview Research LLC, 2015, ISBN 1931448280, pages 1-7
  5. ^ «Definition of: how to install a PC peripheral». PC. Ziff Davis. Archived from the original on 22 March 2018. Retrieved 17 February 2018.
  6. ^ Huang, Eric (3 May 2018). «To USB or Not to USB: USB Dual Role replaces USB On-The-Go». synopsys.com. Archived from the original on 25 July 2021. Retrieved 21 July 2021.
  7. ^ «Icon design recommendation for Identifying USB 2.0 Ports on PCs, Hosts and Hubs» (PDF). USB. Archived (PDF) from the original on 3 October 2016. Retrieved 26 April 2013..
  8. ^ «Members». Archived from the original on 7 November 2021. Retrieved 7 November 2021.
  9. ^ «Two decades of «plug and play»: How USB became the most successful interface in the history of computing». Archived from the original on 15 June 2021. Retrieved 14 June 2021.
  10. ^ «Intel Fellow: Ajay V. Bhatt». Intel Corporation. Archived from the original on 4 November 2009.
  11. ^ Rogoway, Mark (9 May 2009). «Intel ad campaign remakes researchers into rock stars». The Oregonian. Archived from the original on 26 August 2009. Retrieved 23 September 2009.
  12. ^ Pan, Hui; Polishuk, Paul (eds.). 1394 Monthly Newsletter. Information Gatekeepers. pp. 7–9. GGKEY:H5S2XNXNH99. Archived from the original on 12 November 2012. Retrieved 23 October 2012.
  13. ^ «SuperSpeed USB 3.0: More Details Emerge». PC world. 6 January 2009. Archived from the original on 24 January 2009.
  14. ^ «4.2.1». Universal Serial Bus Specification (PDF) (Technical report). 1996. p. 29. v1.0. Archived (PDF) from the original on 30 January 2018.
  15. ^ «Eight ways the iMac changed computing». Macworld. 15 August 2008. Archived from the original on 22 December 2011. Retrieved 5 September 2017.
  16. ^ «The PC Follows iMac’s Lead». Business week. 1999. Archived from the original on 23 September 2015.
  17. ^ «Popular Mechanics: Making Connections». Popular Mechanics Magazine. Hearst Magazines: 59. February 2001. ISSN 0032-4558. Archived from the original on 15 February 2017.
  18. ^ «High Speed USB Maximum Theoretical Throughput». Microchip Technology Incorporated. 23 March 2021. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  19. ^ «Full Speed USB Maximum Theoretical Throughput». Microchip Technology Incorporated. 23 March 2021. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  20. ^ «USB 2.0 Specification». USB Implementers Forum. Archived from the original on 3 December 2017. Retrieved 28 April 2019.
  21. ^ «Battery Charging v1.2 Spec and Adopters Agreement» (ZIP). USB Implementers Forum. 7 March 2012. Archived from the original on 6 October 2014. Retrieved 13 May 2021.
  22. ^ «USB 3.0 Specification Now Available» (PDF) (Press release). San Jose, Calif. 17 November 2008. Archived from the original (PDF) on 31 March 2010. Retrieved 22 June 2010 – via usb.org.
  23. ^ a b c d e Universal Serial Bus 3.0 Specification (ZIP). Hewlett-Packard Company Intel Corporation Microsoft Corporation NEC Corporation ST-Ericsson Texas Instruments. 6 June 2011. Archived from the original on 19 May 2014 – via www.usb.org.
    «Universal Serial Bus 3.0 Specification» (PDF). 12 November 2008. Archived (PDF) from the original on 6 October 2012. Retrieved 29 December 2012 – via www.gaw.ru.
  24. ^ «USB 3.0 Technology» (PDF). HP. 2012. Archived from the original on 19 February 2015. Retrieved 2 January 2014.
  25. ^ a b c d «USB 3.1 Specification – Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 12 March 2016 – via www.usb.org.
  26. ^ Silvia (5 August 2015). «USB 3.1 Gen 1 & Gen 2 explained». www.msi.org. Archived from the original on 8 July 2018. Retrieved 5 April 2018.
  27. ^ Universal Serial Bus 3.1 Specification. Hewlett-Packard Company Intel Corporation Microsoft Corporation Renesas Corporation ST-Ericsson Texas Instruments. 26 July 2013. Archived from the original (ZIP) on 21 November 2014. Retrieved 19 November 2014 – via www.usb.org.
  28. ^ «The USB 3.2 Specification released on September 22, 2017 and ECNs». usb.org. 22 September 2017. Archived from the original on 6 July 2019. Retrieved 4 September 2019.
  29. ^ «USB 3.0 Promoter Group Announces USB 3.2 Update» (PDF) (Press release). Beaverton, Oregon, US. 25 July 2017. Archived (PDF) from the original on 21 September 2017. Retrieved 27 July 2017 – via www.usb.org.
  30. ^ «USB 3.2 Specification Language Usage Guidelines from USB-IF» (PDF). usb.org. 26 February 2019. Archived (PDF) from the original on 3 November 2021. Retrieved 4 September 2019.
  31. ^ Ravencraft, Jeff (19 November 2019). «USB DevDays 2019 – Branding Session» (PDF). USB Implementers Forum (Presentation). p. 16. Archived from the original (PDF) on 22 March 2020. Retrieved 22 March 2020.
  32. ^ a b «USB Promoter Group USB4 Specification». usb.org. 29 August 2019. Archived from the original on 13 February 2021. Retrieved 30 August 2019.
  33. ^ Bright, Peter (4 March 2019). «Thunderbolt 3 becomes USB4, as Intel’s interconnect goes royalty-free». Ars Technica. Archived from the original on 13 February 2021. Retrieved 4 March 2019.
  34. ^ Grunin, Lori (4 March 2019). «USB4 marries Thunderbolt 3 for faster speeds and smarter transfers». CNET. Archived from the original on 4 March 2019. Retrieved 4 March 2019.
  35. ^ Brant, Tom (4 March 2019). «Thunderbolt 3 Merges With USB to Become USB4». PC Magazine. Archived from the original on 5 March 2019. Retrieved 4 March 2019.
  36. ^ «USB Promoter Group Announces USB4 Version 2.0 Specification defines delivering up to 80 Gbps over USB Type-C» (PDF).
  37. ^ «USB Data Performance, Language Usage Guidelines from USB-IF» (PDF). Retrieved 2 September 2022.
  38. ^ Matt Elliot (11 March 2019). «USB 3.2 explained: Making sense of current and confusing USB standards». CNET. Archived from the original on 27 July 2017. Retrieved 26 July 2022.
  39. ^ «USB4® Specification v2.0 | USB-IF».
  40. ^ «Battery Charging v1.1 Spec and Adopters Agreement». USB.org. Archived from the original on 11 January 2021. Retrieved 31 July 2019.
  41. ^ «Battery Charging v1.2 Spec and Adopters Agreement». USB.org. Archived from the original on 31 July 2019. Retrieved 31 July 2019.
  42. ^ «USB Power Delivery». USB.org. Archived from the original on 3 September 2019. Retrieved 3 September 2019.
  43. ^ «USB Type-C Cable and Connector Specification Revision 2.1». USB.org. Archived from the original on 27 May 2021. Retrieved 27 May 2021.
  44. ^ a b «USB Power Delivery». USB.org. Archived from the original on 27 May 2021. Retrieved 27 May 2021.
  45. ^ «Universal Serial Bus Specification Revision 2.0». USB.org. 11 October 2011. pp. 13, 30, 256. Archived from the original (ZIP) on 28 May 2012. Retrieved 8 September 2012.
  46. ^ Dan Froelich (20 May 2009). «Isochronous Protocol» (PDF). USB.org. Archived from the original (PDF) on 17 August 2014. Retrieved 21 November 2014.
  47. ^ «USB Class Codes». 22 September 2018. Archived from the original on 22 September 2018 – via www.usb.org.
  48. ^ Use class information in the interface descriptors. This base class is defined to use in device descriptors to indicate that class information should be determined from the Interface Descriptors in the device.
  49. ^ «Universal Serial Bus Test and Measurement Class Specification (USBTMC) Revision 1.0» (PDF). USB Implementers Forum. 14 April 2003. Archived (PDF) from the original on 23 December 2018. Retrieved 10 May 2018 – via sdpha2.ucsd.edu.
  50. ^ a b «Universal Serial Bus Device Class Specification for Device Firmware Upgrade, Version 1.1» (PDF). USB Implementers Forum. 15 October 2004. pp. 8–9. Archived (PDF) from the original on 11 October 2014. Retrieved 8 September 2014.
  51. ^ «100 Portable Apps for your USB Stick (both for Mac and Win)». Archived from the original on 2 December 2008. Retrieved 30 October 2008.
  52. ^ «Skype VoIP USB Installation Guide». Archived from the original on 6 July 2014. Retrieved 30 October 2008.
  53. ^ «PS/2 to USB Keyboard and Mouse Adapter». StarTech.com. Archived from the original on 12 November 2014.
  54. ^ «Universal Serial Bus Device Class Specification for Device Firmware Upgrade, Version 1.0» (PDF). USB Implementers Forum. 13 May 1999. pp. 7–8. Archived from the original (PDF) on 24 August 2014. Retrieved 8 September 2014.
  55. ^ «rpms/dfu-util: USB Device Firmware Upgrade tool». fedoraproject.org. 14 May 2014. Archived from the original on 8 September 2014. Retrieved 8 September 2014.
  56. ^ Karsten Nohl; Sascha Krißler; Jakob Lell (7 August 2014). «BadUSB – On accessories that turn evil» (PDF). srlabs.de. Security Research Labs. Archived from the original (PDF) on 8 August 2014. Retrieved 8 September 2014.
  57. ^ «USB-IF Announces USB Audio Device Class 3.0 Specification». Business Wire (Press release). Houston, Texas & Beaverton, Oregon. 27 September 2016. Archived from the original on 4 May 2018. Retrieved 4 May 2018.
  58. ^ «USB Device Class Specifications». www.usb.org. Archived from the original on 13 August 2014. Retrieved 4 May 2018.
  59. ^ a b c d e f Strong, Laurence (2015). «Why do you need USB Audio Class 2?» (PDF). XMOS. Archived from the original (PDF) on 24 November 2017. Retrieved 11 December 2020. In applications where streaming latency is important, UAC2 offers up to an 8x reduction over UAC1. … Each clocking method has pros and cons and best-fit applications.
  60. ^ «USB Audio 2.0 Drivers». Microsoft Hardware Dev Center. Archived from the original on 4 May 2018. Retrieved 4 May 2018. ADC-2 refers to the USB Device Class Definition for Audio Devices, Release 2.0.
  61. ^ «New USB Audio Class for USB Type-C Digital Headsets». Synopsys.com. Archived from the original on 7 May 2018. Retrieved 7 May 2018.
  62. ^ a b Kars, Vincent (May 2011). «USB». The Well-Tempered Computer. Archived from the original on 7 May 2018. Retrieved 7 May 2018. All operating systems (Win, OSX, and Linux) support USB Audio Class 1 natively. This means you don’t need to install drivers, it is plug&play.
  63. ^ «Fundamentals of USB Audio» (PDF). www.xmos.com. XMOS Ltd. 2015. Retrieved 10 December 2020. Note that Full Speed USB has a much higher intrinsic latency of 2ms
  64. ^ a b «This Just In: Microsoft Launches Native Class 2 USB Audio Support. Wait, What?». Computer Audiophile. Archived from the original on 2 September 2018. Retrieved 7 May 2018. Class 2 support enables much higher sample rates such as PCM 24 bit / 384 kHz and DSD (DoP) up through DSD256.
  65. ^ «Announcing Windows 10 Insider Preview Build 14931 for PC». Windows Experience Blog. 21 September 2016. Archived from the original on 23 September 2016. Retrieved 7 May 2018. We now have native support for USB Audio 2.0 devices with an inbox class driver! This is an early version of the driver that does not have all features enabled
  66. ^ Plummer, Gregg (20 September 2017). «Ampliozone: USB Audio Class 2.0 Support in Windows 10, FINALLY!!!!». Ampliozone. Archived from the original on 7 May 2018. Retrieved 7 May 2018.
  67. ^ a b «USB Digital Audio». Android Open Source Project. Retrieved 16 February 2023. Synchronous sub-mode is not commonly used with audio because both host and peripheral are at the mercy of the USB clock.{{cite web}}: CS1 maint: url-status (link)
  68. ^ «32-bit Atmel Microcontroller Application Note» (PDF). Atmel Corporation. 2011. Archived (PDF) from the original on 6 May 2016. Retrieved 13 April 2016.
  69. ^ «PCM2906C datasheet» (PDF). Texas Instruments. November 2011. Archived (PDF) from the original on 4 May 2018. Retrieved 4 May 2018. The PCM2906C employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data.
  70. ^ Castor-Perry, Kendall (October 2010). «Designing Modern USB Audio Systems». Cypress Semiconductor. Archived from the original on 5 May 2018. Retrieved 4 May 2018.
  71. ^ a b Castor-Perry, Kendall (2011). «Programmable Clock Generation and Synchronization for USB Audio Systems». Cypress Semiconductor. Archived from the original on 4 May 2018. Retrieved 4 May 2018. Early USB replay interfaces used synchronous mode but acquired a reputation for poor quality of the recovered clock (and resultant poor replay quality). This was primarily due to deficiencies of clocking implementation rather than inherent shortcomings of the approach.
  72. ^ Kondoh, Hitoshi (20 February 2002). «The D/A diaries: A personal memoir of engineering heartache and triumph» (PDF). Archived (PDF) from the original on 12 December 2019. Retrieved 4 May 2018. The fact that there is no clock line within the USB cable leads to a thinner cable, which is an advantage. But, no matter how good the crystal oscillators are at the send and receive ends, there will always be some difference between the two…
  73. ^ «USB 2.0 Documents». www.usb.org. Archived from the original on 3 December 2017. Retrieved 7 May 2018.
  74. ^ «Our Guide to USB Audio — Why Should I Use it?». Cambridge Audio. Archived from the original on 7 May 2018. Retrieved 7 May 2018. Synchronous USB DAC is the lowest quality of the three … Adaptive … means that there is no continuous, accurate master clock in the DAC, which causes jitter in the audio stream. … Asynchronous – this is the most complex to implement but it is a huge improvement on the other types.
  75. ^ Kars, Vincent (July 2012). «USB versus USB». The Well-Tempered Computer. Archived from the original on 22 April 2018. Retrieved 7 May 2018. Synchronous is not used in a quality DAC as it is very jittery. … asynchronous is the better of these modes.
  76. ^ «Low-Jitter USB: Dan Lavry, Michael Goodman, Adaptive, Asynchronous». Headphone Reviews and Discussion — Head-Fi.org. Archived from the original on 7 May 2018. Retrieved 7 May 2018. Some manufacturers may lead you to believe that Asynchronous USB transfers are superior to Adaptive USB transfers and that therefore you must believe in the asynchronous solution. This no more true than saying that you «must» hold the fork in your left hand. In fact, if you know what you are doing, you will feed yourself with either hand. The issue is really about good engineering practices.
  77. ^ «USB 2.0 Specification Engineering Change Notice (ECN) #1: Mini-B connector» (PDF). 20 October 2000. Archived (PDF) from the original on 12 April 2015. Retrieved 29 December 2014 – via www.usb.org.
  78. ^ «USB Cable Length Limitations» (PDF). CablesPlusUSA.com. 3 November 2010. Archived from the original (PDF) on 11 October 2014. Retrieved 2 February 2014.
  79. ^ «What is the Maximum Length of a USB Cable?». Techwalla.com. Archived from the original on 1 December 2017. Retrieved 18 November 2017.
  80. ^ a b «Cables and Long-Haul Solutions». USB 2.0 Frequently Asked Questions. USB Implementers Forum. Archived from the original on 18 January 2011. Retrieved 28 April 2019.
  81. ^ Axelson, Jan. «USB 3.0 Developers FAQ». Archived from the original on 20 December 2016. Retrieved 20 October 2016.
  82. ^ «USB 3.1 — Type-C Host to Host». superuser.com. Archived from the original on 14 October 2021. Retrieved 21 July 2021.
  83. ^ «Parameter Values». Battery Charging Specification, Revision 1.2. USB Implementers Forum. 7 December 2010. p. 45. Archived from the original on 28 March 2016. Retrieved 29 March 2016.
  84. ^ «OVERVIEW OF USB BATTERY CHARGING REVISION 1.2 AND THE IMPORTANT ROLE OF ADAPTER EMULATORS» (PDF). maxim integrated. 2014. p. 3. Archived (PDF) from the original on 4 July 2021. Retrieved 12 August 2021.
  85. ^ «USB in a NutShell – Chapter 2: Hardware». Beyond Logic.org. Archived from the original on 20 August 2007. Retrieved 25 August 2007.
  86. ^ «USB Logo Usage Guidelines» (PDF). USB Implementers Forum. Archived (PDF) from the original on 9 January 2022. Retrieved 13 February 2022.
  87. ^ «USB 3.2 Specification Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 3 November 2021. Retrieved 4 September 2019.
  88. ^ «USB4 Specification Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 13 November 2021. Retrieved 13 February 2022.
  89. ^ «Media Agnostic USB v1.0a Spec and Adopters Agreement». usb.org. Archived from the original on 31 July 2021. Retrieved 21 July 2021.
  90. ^ Shaikh, Roshan Ashraf (3 November 2020). «USB-IF releases final specification of Media Agnostic USB». tweaktown.com. Archived from the original on 15 March 2021. Retrieved 21 July 2021.
  91. ^ Shuler, Kurt (31 March 2011). «Interchip Connectivity: HSIC, UniPro, HSI, C2C, LLI… oh my!». Arteris IP. Archived from the original on 19 June 2011. Retrieved 24 June 2011.
  92. ^ «USB 3.2 and Beyond». Black Box. Retrieved 4 March 2023.
  93. ^ «FireWire vs. USB 2.0» (PDF). QImaging. Archived (PDF) from the original on 11 October 2010. Retrieved 20 July 2010.
  94. ^ «FireWire vs. USB 2.0 – Bandwidth Tests». Archived from the original on 12 August 2007. Retrieved 25 August 2007.
  95. ^ «USB 2.0 vs FireWire». Pricenfees. Archived from the original on 16 October 2016. Retrieved 25 August 2007.
  96. ^ Metz, Cade (25 February 2003). «The Great Interface-Off: FireWire Vs. USB 2.0». PC Magazine. Archived from the original on 30 September 2007. Retrieved 25 August 2007.
  97. ^ Heron, Robert. «USB 2.0 Versus FireWire». TechTV. Archived from the original on 29 September 2007. Retrieved 25 August 2007.
  98. ^ «FireWire vs. USB 2.0». USB Ware. Archived from the original on 16 March 2007. Retrieved 19 March 2007.
  99. ^ Key, Gary (15 November 2005). «Firewire and USB Performance». Archived from the original on 23 April 2008. Retrieved 1 February 2008.
  100. ^ «802.3, Section 14.3.1.1» (PDF). IEEE. Archived (PDF) from the original on 6 December 2010.
  101. ^ «Powerbook Explodes After Comcast Plugs in Wrong Cable». Consumerist. 8 March 2010. Archived from the original on 25 June 2010. Retrieved 22 June 2010.
  102. ^ «Technical Note. Galvanic Isolation» (PDF). iSYSTEM. 2021. Archived (PDF) from the original on 21 December 2021. Retrieved 13 February 2022.
  103. ^ «Universal Serial Bus Device Class Definition for MIDI Devices» (PDF). usb.org. 1 November 1999. Archived (PDF) from the original on 2 November 2021. Retrieved 21 July 2021.
  104. ^ «How Thunderbolt Technology Works: Thunderbolt Technology Community». ThunderboltTechnology.net. Archived from the original on 10 February 2014. Retrieved 22 January 2014.
  105. ^ Galbraith, Jim (2 January 2014). «What you need to know about Thunderbolt 2». Macworld. IDG Communications, Inc. Archived from the original on 24 June 2021. Retrieved 18 June 2021.
  106. ^ «One port to rule them all: Thunderbolt 3 and USB Type-C join forces». Archived from the original on 2 June 2015. Retrieved 2 June 2015.
  107. ^ «Thunderbolt 3 is twice as fast and uses reversible USB-C». Archived from the original on 3 June 2015. Retrieved 2 June 2015.
  108. ^ Sebastian Anthony (2 June 2015). «Thunderbolt 3 embraces USB Type-C connector, doubles bandwidth to 40 Gbps». Ars Technica. Archived from the original on 9 June 2015. Retrieved 2 June 2015.
  109. ^ a b Porter, Jon (30 April 2020). «New DisplayPort spec enables 16K video over USB-C». The Verge. Vox Media, LLC. Archived from the original on 15 April 2021. Retrieved 18 June 2021.
  110. ^ «USB4™ Thunderbolt3™ Compatibility Requirements Specification» (PDF). USB. USB.org. January 2021. Archived (PDF) from the original on 19 October 2021. Retrieved 1 January 2021.
  111. ^ «Using AutoRun with a USB Flash Drive (USB stick)». Positive Technologies. 25 June 2022. Archived from the original on 26 April 2022. Retrieved 26 July 2022.

Further reading[edit]

  • Axelson, Jan (1 September 2006). USB Mass Storage: Designing and Programming Devices and Embedded Hosts (1st ed.). Lakeview Research. ISBN 978-1-931-44804-8.
  • ——— (1 December 2007). Serial Port Complete: COM Ports, USB Virtual COM Ports, and Ports for Embedded Systems (2nd ed.). Lakeview Research. ISBN 978-1-931-44806-2.
  • ——— (2015). USB Complete: The Developer’s Guide (5th ed.). Lakeview Research. ISBN 978-1-931448-28-4.
  • Hyde, John (February 2001). USB Design by Example: A Practical Guide to Building I/O Devices (2nd ed.). Intel Press. ISBN 978-0-970-28465-5.
  • «Debugging USB 2.0 for Compliance: It’s Not Just a Digital World» (PDF). Keysight Technologies. Technologies Application Note. Keysight (1382–3).

External links[edit]

General overview[edit]

  • Joel Johnson (29 May 2019). «The unlikely origins of USB, the port that changed everything». Fast Company.
  • Leigh, Peter (24 May 2020). Why Does USB Keep Changing? (video).
  • Parikh, Bijal. «USB (Universal Serial Bus): An Overview». Engineers Garage. WTWH Media. Retrieved 7 May 2022.
  • Barnatt, Christopher (25 September 2022). Explaining USB: From 1.0 to USB4 V2.0 (ExplainingComputers) (video).

Technical documents[edit]

  • «USB Implementers Forum (USB-IF)». USB.org.
  • «USB Document Library (USB 3.2, USB 2.0, Wireless USB, USB-C, USB Power Delivery)». USB.org.
  • «Universal Host Controller Interface (UHCI)» (PDF). Intel – via mit.edu.
  • «USB 3.0 Standard-A, Standard-B, Powered-B connectors». Pinouts guide. Archived from the original on 14 May 2016.
  • Muller, Henk (July 2012). «How To Create And Program USB Devices». Electronic Design.
  • Garney, John (June 1996). «An Analysis of Throughput Characteristics of Universal Serial Bus» (PDF).
  • Hershenhoren, Razi; Reznik, Omer (October 2010). «USB 2.0 Protocol Engine» (PDF).
  • IEC 62680 (Universal Serial Bus interfaces for data and power):
    • IEC 62680-1.1:2015 — Part 1-1: Common components — USB Battery Charging Specification, Revision 1.2
    • IEC 62680-1-2:2018 — Part 1-2: Common components — USB Power Delivery specification
    • IEC 62680-1-3:2018 — Part 1-3: Common components — USB Type-C Cable and Connector Specification
    • IEC 62680-1-4:2018 — Part 1-4: Common components — USB Type-C Authentication Specification
    • IEC 62680-2-1:2015 — Part 2-1: Universal Serial Bus Specification, Revision 2.0
    • IEC 62680-2-2:2015 — Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01
    • IEC 62680-2-3:2015 — Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0
    • IEC 62680-3-1:2017 — Part 3-1: Universal Serial Bus 3.1 Specification
Источник

This article is about the computer bus standard. For other uses, see USB (disambiguation).

USB
Universal Serial Bus

Certified USB.svg

Usb connectors.JPG

Upper image: Certified logo.
Lower image: Various USB connectors (From left to right: male Micro USB B-Type, proprietary UC-E6, male Mini USB (5-pin) B-type, female A-type, male A-type, male B-type. Shown with a centimeter ruler.)
Type Bus
Production history
Designer
  • Compaq
  • DEC
  • IBM
  • Intel
  • Microsoft
  • NEC
  • Nortel
Designed January 1996; 27 years ago
Produced Since May 1996[1]
Superseded Serial port, parallel port, game port, Apple Desktop Bus, PS/2 port, and FireWire (IEEE 1394)

Universal Serial Bus (USB) is an industry standard that establishes specifications for cables, connectors and protocols for connection, communication and power supply (interfacing) between computers, peripherals and other computers.[2] A broad variety of USB hardware exists, including 14 different connector types, of which USB-C is the most recent and the only one not currently deprecated since the release of USB 3.2.

First released in 1996, the USB standards are maintained by the USB Implementers Forum (USB-IF). The four generations of USB are: USB 1.x, USB 2.0, USB 3.x, and USB4.[3]

Overview[edit]

USB was designed to standardize the connection of peripherals to personal computers, both to communicate with and to supply electric power. It has largely replaced interfaces such as serial ports and parallel ports and has become commonplace on a wide range of devices. Examples of peripherals that are connected via USB include computer keyboards and mice, video cameras, printers, portable media players, mobile (portable) digital telephones, disk drives, and network adapters.

USB connectors have been increasingly replacing other types as charging cables of portable devices.

Connector type quick reference[edit]

Each USB connection is made using two connectors: a socket (or receptacle) and a plug. In the following table, schematics for only the sockets are shown, although for each there is a corresponding plug (or plugs).

Available sockets by USB standard

Standard USB 1.0
1996 		USB 1.1
1998 		USB 2.0
2001 		USB 2.0
Revised 		USB 3.0
2008 		USB 3.1
2013 		USB 3.2
2017 		USB4
2019 		USB4 V2
2022
Maximum transfer rate 1.5 Mbit/s 12 Mbps 480 Mbps 5 Gbps 10 Gbps 20 Gbps 40 Gbps 80 Gbps
Type A connector USB Type-A receptacle White.svg USB Type-A receptacle Black.svg USB 3.0 Type-A receptacle blue.svg Deprecated
Type B connector USB Type-B receptacle.svg USB 3.0 Type-B receptacle blue.svg Deprecated
Mini-A connector — USB Mini-A receptacle.svg Deprecated
Mini-B connector — USB Mini-B receptacle.svg Deprecated
Mini-AB connector — USB Mini-AB receptacle.svg Deprecated
Micro-A connector — USB 3.0 Micro-A.svg Deprecated
Micro-B connector — USB 3.0 Micro-B receptacle.svg Deprecated
Micro-AB connector — USB Micro-AB receptacle.svg USB micro AB SuperSpeed.png Deprecated
Type C connector Backwards compatibility only USB Type-C Receptacle Pinout.svg
(Enlarged to show detail)

Objectives[edit]

The Universal Serial Bus was developed to simplify and improve the interface between personal computers and peripheral devices, such as cell phones, computer accessories, and monitors, when compared with previously existing standard or ad hoc proprietary interfaces.[4]

From the computer user’s perspective, the USB interface improves ease of use in several ways:

  • The USB interface is self-configuring, eliminating the need for the user to adjust the device’s settings for speed or data format, or configure interrupts, input/output addresses, or direct memory access channels.[5]
  • USB connectors are standardized at the host, so any peripheral can use most available receptacles.
  • USB takes full advantage of the additional processing power that can be economically put into peripheral devices so that they can manage themselves. As such, USB devices often do not have user-adjustable interface settings.
  • The USB interface is hot-swappable (devices can be exchanged without rebooting the host computer).
  • Small devices can be powered directly from the USB interface, eliminating the need for additional power supply cables.
  • Because use of the USB logo is only permitted after compliance testing, the user can have confidence that a USB device will work as expected without extensive interaction with settings and configuration.
  • The USB interface defines protocols for recovery from common errors, improving reliability over previous interfaces.[4]
  • Installing a device that relies on the USB standard requires minimal operator action. When a user plugs a device into a port on a running computer, it either entirely automatically configures using existing device drivers, or the system prompts the user to locate a driver, which it then installs and configures automatically.

The USB standard also provides multiple benefits for hardware manufacturers and software developers, specifically in the relative ease of implementation:

  • The USB standard eliminates the requirement to develop proprietary interfaces to new peripherals.
  • The wide range of transfer speeds available from a USB interface suits devices ranging from keyboards and mice up to streaming video interfaces.
  • A USB interface can be designed to provide the best available latency for time-critical functions or can be set up to do background transfers of bulk data with little impact on system resources.
  • The USB interface is generalized with no signal lines dedicated to only one function of one device.[4]

Limitations[edit]

As with all standards, USB possesses multiple limitations to its design:

  • USB cables are limited in length, as the standard was intended for peripherals on the same table-top, not between rooms or buildings. However, a USB port can be connected to a gateway that accesses distant devices.
  • USB data transfer rates are slower than those of other interconnects such as 100 Gigabit Ethernet.
  • USB has a strict tree network topology and master/slave protocol for addressing peripheral devices; those devices cannot interact with one another except via the host, and two hosts cannot communicate over their USB ports directly. Some extension to this limitation is possible through USB On-The-Go in, Dual-Role-Devices[6] and protocol bridge.
  • A host cannot broadcast signals to all peripherals at once—each must be addressed individually.
  • While converters exist between certain legacy interfaces and USB, they might not provide a full implementation of the legacy hardware. For example, a USB-to-parallel-port converter might work well with a printer, but not with a scanner that requires bidirectional use of the data pins.

For a product developer, using USB requires the implementation of a complex protocol and implies an «intelligent» controller in the peripheral device. Developers of USB devices intended for public sale generally must obtain a USB ID, which requires that they pay a fee to the USB Implementers Forum (USB-IF). Developers of products that use the USB specification must sign an agreement with the USB-IF. Use of the USB logos on the product requires annual fees and membership in the organization.[4]

History[edit]

Large circle is left end of horizontal line. The line forks into three branches ending in circle, triangle and square symbols.

The basic USB trident logo[7]

USB logo on the head of a standard USB-A plug

A group of seven companies began the development of USB in 1995:[8] Compaq, DEC, IBM, Intel, Microsoft, NEC, and Nortel. The goal was to make it fundamentally easier to connect external devices to PCs by replacing the multitude of connectors at the back of PCs, addressing the usability issues of existing interfaces, and simplifying software configuration of all devices connected to USB, as well as permitting greater data transfer rates for external devices and Plug and Play features.[9] Ajay Bhatt and his team worked on the standard at Intel;[10][11] the first integrated circuits supporting USB were produced by Intel in 1995.[12]

As of 2008, about 6 billion USB ports and interfaces were in the global marketplace, and about 2 billion were being sold each year.[13]

USB 1.x[edit]

Released in January 1996, USB 1.0 specified signaling rates of 1.5 Mbit/s (Low Bandwidth or Low Speed) and 12 Mbit/s (Full Speed).[14] It did not allow for extension cables, due to timing and power limitations. Few USB devices made it to the market until USB 1.1 was released in August 1998. USB 1.1 was the earliest revision that was widely adopted and led to what Microsoft designated the «Legacy-free PC».[15][16][17]

Neither USB 1.0 nor 1.1 specified a design for any connector smaller than the standard type A or type B. Though many designs for a miniaturised type B connector appeared on many peripherals, conformity to the USB 1.x standard was hampered by treating peripherals that had miniature connectors as though they had a tethered connection (that is: no plug or receptacle at the peripheral end). There was no known miniature type A connector until USB 2.0 (revision 1.01) introduced one.

USB 2.0[edit]

USB 2.0 was released in April 2000, adding a higher maximum signaling rate of 480 Mbit/s (maximum theoretical data throughput 53 MByte/s[18]) named High Speed or High Bandwidth, in addition to the USB 1.x Full Speed signaling rate of 12 Mbit/s (maximum theoretical data throughput 1.2 MByte/s[19]).

Modifications to the USB specification have been made via engineering change notices (ECNs). The most important of these ECNs are included into the USB 2.0 specification package available from USB.org:[20]

  • Mini-A and Mini-B Connector
  • Micro-USB Cables and Connectors Specification 1.01
  • InterChip USB Supplement
  • On-The-Go Supplement 1.3 USB On-The-Go makes it possible for two USB devices to communicate with each other without requiring a separate USB host
  • Battery Charging Specification 1.1 Added support for dedicated chargers, host chargers behaviour for devices with dead batteries
  • Battery Charging Specification 1.2:[21] with increased current of 1.5 A on charging ports for unconfigured devices, allowing High Speed communication while having a current up to 1.5 A
  • Link Power Management Addendum ECN, which adds a sleep power state

USB 3.x[edit]

The USB 3.0 specification was released on 12 November 2008, with its management transferring from USB 3.0 Promoter Group to the USB Implementers Forum (USB-IF) and announced on 17 November 2008 at the SuperSpeed USB Developers Conference.[22]

USB 3.0 adds a SuperSpeed transfer mode, with associated backward compatible plugs, receptacles, and cables. SuperSpeed plugs and receptacles are identified with a distinct logo and blue inserts in standard format receptacles.

The SuperSpeed bus provides for a transfer mode at a nominal rate of 5.0 Gbit/s, in addition to the three existing transfer modes. Its efficiency is dependent on a number of factors including physical symbol encoding and link level overhead. At a 5 Gbit/s signaling rate with 8b/10b encoding, each byte needs 10 bits to transmit, so the raw throughput is 500 MB/s. When flow control, packet framing and protocol overhead are considered, it is realistic for 400 MB/s (3.2 Gbit/s) or more to transmit to an application.[23]: 4–19  Communication is full-duplex in SuperSpeed transfer mode; earlier modes are half-duplex, arbitrated by the host.[24]

USB-A 3.1 Gen 1 (formerly known as USB 3.0; later renamed USB 3.2 Gen 1×1) ports

Low-power and high-power devices remain operational with this standard, but devices using SuperSpeed can take advantage of increased available current of between 150 mA and 900 mA, respectively.[23]: 9–9 

USB 3.1, released in July 2013 has two variants. The first one preserves USB 3.0’s SuperSpeed transfer mode and is labeled USB 3.1 Gen 1,[25][26] and the second version introduces a new SuperSpeed+ transfer mode under the label of USB 3.1 Gen 2. SuperSpeed+ doubles the maximum data signaling rate to 10 Gbit/s, while reducing line encoding overhead to just 3% by changing the encoding scheme to 128b/132b.[25][27]

USB 3.2, released in September 2017,[28] preserves existing USB 3.1 SuperSpeed and SuperSpeed+ data modes but introduces two new SuperSpeed+ transfer modes over the new USB-C connector with data rates of 10 and 20 Gbit/s (1.25 and 2.5 GB/s). The increase in bandwidth is a result of multi-lane operation over existing wires that were intended for flip-flop capabilities of the USB-C connector.[29]

USB 3.0 also introduced the USB Attached SCSI (UASP) protocol, which provides generally faster transfer speeds than the BOT (Bulk-Only-Transfer) protocol.

Naming scheme[edit]

An overview of old naming scheme for USB 3.2 (deprecated as of September 2022).

Starting with the USB 3.2 standard, USB-IF introduced a new naming scheme.[30] To help companies with branding of the different transfer modes, USB-IF recommended branding the 5, 10, and 20 Gbit/s transfer modes as SuperSpeed USB 5Gbps, SuperSpeed USB 10Gbps, and SuperSpeed USB 20Gbps, respectively.[31] As of September 2022, this naming scheme is deprecated.

USB4[edit]

Main article: USB4

The certified USB4 40Gbps logo

The USB4 40Gbps trident logo

The certified USB4 40Gbps logo and trident logo

The USB4 specification was released on 29 August 2019 by the USB Implementers Forum.[32]

USB4 is based on the Thunderbolt 3 protocol.[33] It supports 40 Gbit/s throughput, is compatible with Thunderbolt 3, and backward compatible with USB 3.2 and USB 2.0.[34][35] The architecture defines a method to share a single high-speed link with multiple end device types dynamically that best serves the transfer of data by type and application.

The USB4 specification states that the following technologies shall be supported by USB4:[32]

Connection Mandatory for Remarks
host hub device
USB 2.0 (480 Mbit/s) Yes Yes Yes Contrary to other functions—which use the multiplexing of high-speed links—USB 2.0 over USB-C utilizes its own differential pair of wires.
USB4 Gen 2×2 (20 Gbit/s) Yes Yes Yes A USB 3.0-labelled device still operates via a USB4 host or hub as a USB 3.0 device. The device requirement of Gen 2×2 applies only to the newcoming USB4-labelled devices.
USB4 Gen 3×2 (40 Gbit/s) No Yes No
DisplayPort Yes Yes No The specification requires that hosts and hubs support the DisplayPort Alternate Mode.
Host-to-Host communications Yes Yes — A LAN-like connection between two peers.
PCI Express No Yes No The PCI Express function of USB4 replicates the functionality of previous versions of the Thunderbolt specification.
Thunderbolt 3 No Yes No Thunderbolt 3 uses USB-C cables; the USB4 specification allows hosts and devices and requires hubs to support interoperability with the standard using the Thunderbolt 3 Alternate Mode.
Other Alternate Modes No No No USB4 products may optionally offer interoperability with the HDMI, MHL, and VirtualLink Alternate Modes.

During CES 2020, USB-IF and Intel stated their intention to allow USB4 products that support all the optional functionality as Thunderbolt 4 products. The first products compatible with USB4 are expected to be Intel’s Tiger Lake series and AMD’s Zen 3 series of CPUs. Released in 2020.

The USB4 2.0 specification was released on 1 September 2022 by the USB Implementers Forum.[36]

September 2022 naming scheme[edit]

An overview of USB naming scheme that was put in place in September 2022.
(A mix of USB specifications and their marketing names are being displayed, because specifications are sometimes wrongly used as marketing names)

Because of the previous confusing naming schemes, USB-IF decided to change it once again. As of 2 September 2022, marketing names follow the syntax «USB XGbps», where X is the speed of transfer in Gb/s.[37] Overview of the updated names and logos can be seen in the adjacent table.

Version history [edit]

Release versions[edit]

Name Release date Maximum transfer rate Note
USB 0.7 11 November 1994 ? Pre-release
USB 0.8 December 1994 ? Pre-release
USB 0.9 13 April 1995 Full Speed (12 Mbit/s) Pre-release
USB 0.99 August 1995 ? Pre-release
USB 1.0-RC November 1995 ? Release Candidate
USB 1.0 15 January 1996 Low Speed (1.5 Mbit/s)

Full Speed (12 Mbit/s)

USB 1.1 August 1998
USB 2.0 April 2000 High Speed (480 Mbit/s)
USB 3.0 November 2008 SuperSpeed USB (5 Gbit/s) Also referred to as USB 3.1 Gen 1[25] and USB 3.2 Gen 1 × 1
USB 3.1 July 2013 SuperSpeed+ USB (10 Gbit/s) Includes new USB 3.1 Gen 2,[25] also named USB 3.2 Gen 2 × 1 in later specifications. Last version to support Type A connector.
USB 3.2 August 2017 SuperSpeed+ USB dual-lane (20 Gbit/s) Includes new USB 3.2 Gen 1 × 2 and Gen 2 × 2 multi-link modes.[38] Requires Type C connector.
USB4 August 2019 40 Gbit/s (2-lane) Includes new USB4 Gen 2 × 2 (64b/66b encoding) and Gen 3 × 2 (128b/132b encoding) modes and introduces USB4 routing for tunnelling of USB3.x, DisplayPort 1.4a and PCI Express traffic and host-to-host transfers, based on the Thunderbolt 3 protocol
USB4 2.0 September 2022 120 Gbit/s Includes new 80 and 120 Gbit/s modes over Type C connector[39]

Power-related standards[edit]

Release name Release date Max. power Note
USB Battery Charging Rev. 1.0 2007-03-08 7.5 W (5 V, 1.5 A)
USB Battery Charging Rev. 1.1 2009-04-15 7.5 W (5 V, 1.5 A) Page 28, Table 5–2, but with limitation on paragraph 3.5. In ordinary USB 2.0’s standard-A port, 1.5 A only.[40]
USB Battery Charging Rev. 1.2 2010-12-07 7.5 W (5 V, 1.5 A) [41]
USB Power Delivery Rev. 1.0 (V. 1.0) 2012-07-05 100 W (20 V, 5 A) Using FSK protocol over bus power (VBUS)
USB Power Delivery Rev. 1.0 (V. 1.3) 2014-03-11 100 W (20 V, 5 A)
USB Type-C Rev. 1.0 2014-08-11 15 W (5 V, 3 A) New connector and cable specification
USB Power Delivery Rev. 2.0 (V. 1.0) 2014-08-11 100 W (20 V, 5 A) Using BMC protocol over communication channel (CC) on USB-C cables.
USB Type-C Rev. 1.1 2015-04-03 15 W (5 V, 3 A)
USB Power Delivery Rev. 2.0 (V. 1.1) 2015-05-07 100 W (20 V, 5 A)
USB Type-C Rev. 1.2 2016-03-25 15 W (5 V, 3 A)
USB Power Delivery Rev. 2.0 (V. 1.2) 2016-03-25 100 W (20 V, 5 A)
USB Power Delivery Rev. 2.0 (V. 1.3) 2017-01-12 100 W (20 V, 5 A)
USB Power Delivery Rev. 3.0 (V. 1.1) 2017-01-12 100 W (20 V, 5 A)
USB Type-C Rev. 1.3 2017-07-14 15 W (5 V, 3 A)
USB Power Delivery Rev. 3.0 (V. 1.2) 2018-06-21 100 W (20 V, 5 A)
USB Type-C Rev. 1.4 2019-03-29 15 W (5 V, 3 A)
USB Type-C Rev. 2.0 2019-08-29 15 W (5 V, 3 A) Enabling USB4 over USB Type-C connectors and cables.
USB Power Delivery Rev. 3.0 (V. 2.0) 2019-08-29 100 W (20 V, 5 A) [42]
USB Power Delivery Rev. 3.1 (V. 1.0) 2021-05-24 240 W (48 V, 5 A)
USB Type-C Rev. 2.1 2021-05-25 15 W (5 V, 3 A) [43]
USB Power Delivery Rev. 3.1 (V. 1.1) 2021-07-06 240 W (48 V, 5 A) [44]
USB Power Delivery Rev. 3.1 (V. 1.2) 2021-10-26 240 W (48 V, 5 A) Including errata through October 2021[44]

This version incorporates the following ECNs:

  • Clarify use of Retries
  • Battery Capabilities
  • FRS timing problem
  • PPS power rule clarifications
  • Peak current support for EPR AVS APDO

System design[edit]

A USB system consists of a host with one or more downstream ports, and multiple peripherals, forming a tiered-star topology. Additional USB hubs may be included, allowing up to five tiers. A USB host may have multiple controllers, each with one or more ports. Up to 127 devices may be connected to a single host controller.[45][23]: 8–29  USB devices are linked in series through hubs. The hub built into the host controller is called the root hub.

A USB device may consist of several logical sub-devices that are referred to as device functions. A composite device may provide several functions, for example, a webcam (video device function) with a built-in microphone (audio device function). An alternative to this is a compound device, in which the host assigns each logical device a distinct address and all logical devices connect to a built-in hub that connects to the physical USB cable.

Diagram: inside a device are several endpoints, each of which connects by a logical pipe to a host controller. Data in each pipe flows in one direction, though there are a mixture going to and from the host controller.

USB endpoints reside on the connected device: the channels to the host are referred to as pipes.

USB device communication is based on pipes (logical channels). A pipe is a connection from the host controller to a logical entity within a device, called an endpoint. Because pipes correspond to endpoints, the terms are sometimes used interchangeably. Each USB device can have up to 32 endpoints (16 in and 16 out), though it is rare to have so many. Endpoints are defined and numbered by the device during initialization (the period after physical connection called «enumeration») and so are relatively permanent, whereas pipes may be opened and closed.

There are two types of pipe: stream and message.

  • A message pipe is bi-directional and is used for control transfers. Message pipes are typically used for short, simple commands to the device, and for status responses from the device, used, for example, by the bus control pipe number 0.
  • A stream pipe is a uni-directional pipe connected to a uni-directional endpoint that transfers data using an isochronous,[46] interrupt, or bulk transfer:
    Isochronous transfers
    At some guaranteed data rate (for fixed-bandwidth streaming data) but with possible data loss (e.g., realtime audio or video)
    Interrupt transfers
    Devices that need guaranteed quick responses (bounded latency) such as pointing devices, mice, and keyboards
    Bulk transfers
    Large sporadic transfers using all remaining available bandwidth, but with no guarantees on bandwidth or latency (e.g., file transfers)

When a host starts a data transfer, it sends a TOKEN packet containing an endpoint specified with a tuple of (device_address, endpoint_number). If the transfer is from the host to the endpoint, the host sends an OUT packet (a specialization of a TOKEN packet) with the desired device address and endpoint number. If the data transfer is from the device to the host, the host sends an IN packet instead. If the destination endpoint is a uni-directional endpoint whose manufacturer’s designated direction does not match the TOKEN packet (e.g. the manufacturer’s designated direction is IN while the TOKEN packet is an OUT packet), the TOKEN packet is ignored. Otherwise, it is accepted and the data transaction can start. A bi-directional endpoint, on the other hand, accepts both IN and OUT packets.

Rectangular opening where the width is twice the height. The opening has a metal rim, and within the opening a flat rectangular bar runs parallel to the top side.

Two USB 3.0 Standard-A receptacles (left) and two USB 2.0 Standard-A receptacles (right) on a computer’s front panel

Endpoints are grouped into interfaces and each interface is associated with a single device function. An exception to this is endpoint zero, which is used for device configuration and is not associated with any interface. A single device function composed of independently controlled interfaces is called a composite device. A composite device only has a single device address because the host only assigns a device address to a function.

When a USB device is first connected to a USB host, the USB device enumeration process is started. The enumeration starts by sending a reset signal to the USB device. The data rate of the USB device is determined during the reset signaling. After reset, the USB device’s information is read by the host and the device is assigned a unique 7-bit address. If the device is supported by the host, the device drivers needed for communicating with the device are loaded and the device is set to a configured state. If the USB host is restarted, the enumeration process is repeated for all connected devices.

The host controller directs traffic flow to devices, so no USB device can transfer any data on the bus without an explicit request from the host controller. In USB 2.0, the host controller polls the bus for traffic, usually in a round-robin fashion. The throughput of each USB port is determined by the slower speed of either the USB port or the USB device connected to the port.

High-speed USB 2.0 hubs contain devices called transaction translators that convert between high-speed USB 2.0 buses and full and low speed buses. There may be one translator per hub or per port.

Because there are two separate controllers in each USB 3.0 host, USB 3.0 devices transmit and receive at USB 3.0 data rates regardless of USB 2.0 or earlier devices connected to that host. Operating data rates for earlier devices are set in the legacy manner.

Device classes[edit]

The functionality of a USB device is defined by a class code sent to a USB host. This allows the host to load software modules for the device and to support new devices from different manufacturers.

Device classes include:[47]

Class Usage Description Examples, or exception
00h Device Unspecified[48] Device class is unspecified, interface descriptors are used to determine needed drivers
01h Interface Audio Speaker, microphone, sound card, MIDI
02h Both Communications and CDC control UART and RS-232 serial adapter, Modem, Wi-Fi adapter, Ethernet adapter. Used together with class 0Ah (CDC-Data) below
03h Interface Human interface device (HID) Keyboard, mouse, joystick
05h Interface Physical interface device (PID) Force feedback joystick
06h Interface Media (PTP/MTP) Scanner, Camera
07h Interface Printer Laser printer, inkjet printer, CNC machine
08h Interface USB mass storage, USB Attached SCSI USB flash drive, memory card reader, digital audio player, digital camera, external drive
09h Device USB hub High speed USB hub
0Ah Interface CDC-Data Used together with class 02h (Communications and CDC Control) above
0Bh Interface Smart Card USB smart card reader
0Dh Interface Content security Fingerprint reader
0Eh Interface Video Webcam
0Fh Interface Personal healthcare device class (PHDC) Pulse monitor (watch)
10h Interface Audio/Video (AV) Webcam, TV
11h Device Billboard Describes USB-C alternate modes supported by device
DCh Both Diagnostic device USB compliance testing device
E0h Interface Wireless Controller Bluetooth adapter, Microsoft RNDIS
EFh Both Miscellaneous ActiveSync device
FEh Interface Application-specific IrDA Bridge, Test & Measurement Class (USBTMC),[49] USB DFU (Device Firmware Upgrade)[50]
FFh Both Vendor-specific Indicates that a device needs vendor-specific drivers

USB mass storage / USB drive[edit]

An M.2 (2242) solid-state-drive (SSD) connected into USB 3.0 adapter and connected to computer.

The USB mass storage device class (MSC or UMS) standardizes connections to storage devices. At first intended for magnetic and optical drives, it has been extended to support flash drives and SD card readers. The ability to boot a write-locked SD card with a USB adapter is particularly advantageous for maintaining the integrity and non-corruptible, pristine state of the booting medium.

Though most personal computers since early 2005 can boot from USB mass storage devices, USB is not intended as a primary bus for a computer’s internal storage. However, USB has the advantage of allowing hot-swapping, making it useful for mobile peripherals, including drives of various kinds.

Several manufacturers offer external portable USB hard disk drives, or empty enclosures for disk drives. These offer performance comparable to internal drives, limited by the number and types of attached USB devices, and by the upper limit of the USB interface. Other competing standards for external drive connectivity include eSATA, ExpressCard, FireWire (IEEE 1394), and most recently Thunderbolt.

Another use for USB mass storage devices is the portable execution of software applications (such as web browsers and VoIP clients) with no need to install them on the host computer.[51][52]

Media Transfer Protocol[edit]

Media Transfer Protocol (MTP) was designed by Microsoft to give higher-level access to a device’s filesystem than USB mass storage, at the level of files rather than disk blocks. It also has optional DRM features. MTP was designed for use with portable media players, but it has since been adopted as the primary storage access protocol of the Android operating system from the version 4.1 Jelly Bean as well as Windows Phone 8 (Windows Phone 7 devices had used the Zune protocol – an evolution of MTP). The primary reason for this is that MTP does not require exclusive access to the storage device the way UMS does, alleviating potential problems should an Android program request the storage while it is attached to a computer. The main drawback is that MTP is not as well supported outside of Windows operating systems.

Human interface devices[edit]

USB mice and keyboards can usually be used with older computers that have PS/2 connectors with the aid of a small USB-to-PS/2 adapter. For mice and keyboards with dual-protocol support, an adaptor that contains no logic circuitry may be used: the USB hardware in the keyboard or mouse is designed to detect whether it is connected to a USB or PS/2 port, and communicate using the appropriate protocol. Converters that connect PS/2 keyboards and mice (usually one of each) to a USB port also exist.[53] These devices present two HID endpoints to the system and use a microcontroller to perform bidirectional data translation between the two standards.

Device Firmware Upgrade mechanism[edit]

Device Firmware Upgrade (DFU) is a vendor- and device-independent mechanism for upgrading the firmware of USB devices with improved versions provided by their manufacturers, offering (for example) a way to deploy firmware bug fixes. During the firmware upgrade operation, USB devices change their operating mode effectively becoming a PROM programmer. Any class of USB device can implement this capability by following the official DFU specifications.[50][54][55]

DFU can also give the user the freedom to flash USB devices with alternative firmware. One consequence of this is that USB devices after being re-flashed may act as various unexpected device types. For example, a USB device that the seller intends to be just a flash drive can «spoof» an input device like a keyboard. See BadUSB.[56]

Audio streaming[edit]

The USB Device Working Group has laid out specifications for audio streaming, and specific standards have been developed and implemented for audio class uses, such as microphones, speakers, headsets, telephones, musical instruments, etc. The working group has published three versions of audio device specifications:[57][58] USB Audio 1.0, 2.0, and 3.0, referred to as «UAC»[59] or «ADC».[60]

UAC 3.0 primarily introduces improvements for portable devices, such as reduced power usage by bursting the data and staying in low power mode more often, and power domains for different components of the device, allowing them to be shut down when not in use.[61]

UAC 2.0 introduced support for High Speed USB (in addition to Full Speed), allowing greater bandwidth for multi-channel interfaces, higher sample rates,[62] lower inherent latency,[63][59] and 8× improvement in timing resolution in synchronous and adaptive modes.[59] UAC2 also introduced the concept of clock domains, which provides information to the host about which input and output terminals derive their clocks from the same source, as well as improved support for audio encodings like DSD, audio effects, channel clustering, user controls, and device descriptions.[59][64]

UAC 1.0 devices are still common, however, due to their cross-platform driverless compatibility,[62] and also partly due to Microsoft’s failure to implement UAC 2.0 for over a decade after its publication, having finally added support to Windows 10 through the Creators Update on 20 March 2017.[65][66][64] UAC 2.0 is also supported by macOS, iOS, and Linux,[59] however Android only implements a subset of the UAC 1.0 specification.[67]

USB provides three isochronous (fixed-bandwidth) synchronization types,[68] all of which are used by audio devices:[69]

  • Asynchronous – The ADC or DAC are not synced to the host computer’s clock at all, operating off a free-running clock local to the device.
  • Synchronous – The device’s clock is synced to the USB start-of-frame (SOF) or Bus Interval signals. For instance, this can require syncing an 11.2896 MHz clock to a 1 kHz SOF signal, a large frequency multiplication.[70][71]
  • Adaptive – The device’s clock is synced to the amount of data sent per frame by the host[72]

While the USB spec originally described asynchronous mode being used in «low cost speakers» and adaptive mode in «high-end digital speakers»,[73] the opposite perception exists in the hi-fi world, where asynchronous mode is advertised as a feature, and adaptive/synchronous modes have a bad reputation.[74][75][67] In reality, all types can be high-quality or low-quality, depending on the quality of their engineering and the application.[71][59][76] Asynchronous has the benefit of being untied from the computer’s clock, but the disadvantage of requiring sample rate conversion when combining multiple sources.

Connectors[edit]

The connectors the USB committee specifies support a number of USB’s underlying goals, and reflect lessons learned from the many connectors the computer industry has used. The female connector mounted on the host or device is called the receptacle, and the male connector attached to the cable is called the plug.[23]: 2–5 – 2–6  The official USB specification documents also periodically define the term male to represent the plug, and female to represent the receptacle.[77]

USB Type-A plug

The standard USB Type-A plug. This is one of many types of USB connector.

The design is intended to make it difficult to insert a USB plug into its receptacle incorrectly. The USB specification requires that the cable plug and receptacle be marked so the user can recognize the proper orientation.[23] The USB-C plug however is reversible. USB cables and small USB devices are held in place by the gripping force from the receptacle, with no screws, clips, or thumb-turns as some connectors use.

The different A and B plugs prevent accidentally connecting two power sources. However, some of this directed topology is lost with the advent of multi-purpose USB connections (such as USB On-The-Go in smartphones, and USB-powered Wi-Fi routers), which require A-to-A, B-to-B, and sometimes Y/splitter cables.

USB connector types multiplied as the specification progressed. The original USB specification detailed standard-A and standard-B plugs and receptacles. The connectors were different so that users could not connect one computer receptacle to another. The data pins in the standard plugs are recessed compared to the power pins, so that the device can power up before establishing a data connection. Some devices operate in different modes depending on whether the data connection is made. Charging docks supply power and do not include a host device or data pins, allowing any capable USB device to charge or operate from a standard USB cable. Charging cables provide power connections, but not data. In a charge-only cable, the data wires are shorted at the device end, otherwise the device may reject the charger as unsuitable.

Cabling[edit]

A variety of USB cables for sale in Hong Kong

The USB 1.1 standard specifies that a standard cable can have a maximum length of 5 meters (16 ft 5 in) with devices operating at full speed (12 Mbit/s), and a maximum length of 3 meters (9 ft 10 in) with devices operating at low speed (1.5 Mbit/s).[78][79][80]

USB 2.0 provides for a maximum cable length of 5 meters (16 ft 5 in) for devices running at high speed (480 Mbit/s).[80]

The USB 3.0 standard does not directly specify a maximum cable length, requiring only that all cables meet an electrical specification: for copper cabling with AWG 26 wires the maximum practical length is 3 meters (9 ft 10 in).[81]

USB bridge cables[edit]

USB bridge cables, or data transfer cables can be found within the market, offering direct PC to PC connections. A bridge cable is a special cable with a chip and active electronics in the middle of the cable. The chip in the middle of the cable acts as a peripheral to both computers and allows for peer-to-peer communication between the computers. The USB bridge cables are used to transfer files between two computers via their USB ports.

Popularized by Microsoft as Windows Easy Transfer, the Microsoft utility used a special USB bridge cable to transfer personal files and settings from a computer running an earlier version of Windows to a computer running a newer version. In the context of the use of Windows Easy Transfer software, the bridge cable can sometimes be referenced as Easy Transfer cable.

Many USB bridge / data transfer cables are still USB 2.0, but there are also a number of USB 3.0 transfer cables. Despite USB 3.0 being 10 times faster than USB 2.0, USB 3.0 transfer cables are only 2 — 3 times faster given their design.[clarification needed]

The USB 3.0 specification introduced an A-to-A cross-over cable without power for connecting two PCs. These are not meant for data transfer but are aimed at diagnostic uses.

Dual-role USB connections[edit]

USB bridge cables have become less important with USB dual-role-device capabilities introduced with the USB 3.1 specification. Under the most recent specifications, USB supports most scenarios connecting systems directly with a Type-C cable. For the capability to work, however, connected systems must support role-switching. Dual-role capabilities requires there be two controllers within the system, as well as a role controller. While this can be expected in a mobile platform such as a tablet or a phone, desktop PCs and laptops often will not support dual roles.[82]

Power[edit]

Upstream USB connectors supply power at a nominal 5V DC via the V_BUS pin to downstream USB devices.

Low-power and high-power devices[edit]

Low-power devices may draw at most 1-unit load, and all devices must act as low-power devices when starting out as unconfigured. 1 unit load is 100 mA for USB devices up to USB 2.0, while USB 3.0 defines a unit load as 150 mA.

High-power devices (such as a typical 2.5-inch USB hard disk drive) draw at least 1 unit load and at most 5-unit loads (5x100mA = 500 mA) for devices up to USB 2.0- or 6-unit loads (6x150mA= 900 mA) for SuperSpeed (USB 3.0 and up) devices.

USB power standards

Specification Current Voltage Power (max.)
Low-power device 100 mA 5 V[a] 0.50 W
Low-power SuperSpeed (USB 3.0) device 150 mA 5 V[a] 0.75 W
High-power device 500 mA[b] 5 V 2.5 W
High-power SuperSpeed (USB 3.0) device 900 mA[c] 5 V 4.5 W
Multi-lane SuperSpeed (USB 3.2 Gen 2) device 1.5 A[d] 5 V 7.5 W
Battery Charging (BC) 1.1 1.5 A 5 V 7.5 W
Battery Charging (BC) 1.2 1.5 A 5 V 7.5 W
USB-C 1.5 A 5 V 7.5 W
3 A 5 V 15 W
Power Delivery 1.0/2.0/3.0 Type-C 5 A[e] 20 V 100 W
Power Delivery 3.1 Type-C 5 A[e] 48 V[f] 240 W
  1. ^ a b The VBUS supply from a low-powered hub port may drop to 4.40 V.
  2. ^ Up to five unit loads; with non-SuperSpeed devices, one unit load is 100 mA.
  3. ^ Up to six unit loads; with SuperSpeed devices, one unit load is 150 mA.
  4. ^ Up to six unit loads; with multi-lane devices, one unit load is 250 mA.
  5. ^ a b >3 A (>60 W) operation requires an electronically marked cable rated at 5 A.
  6. ^ >20 V (>100 W) operation requires an electronically marked Extended Power Range (EPR) cable.

To recognize Battery Charging mode, a dedicated charging port places a resistance not exceeding 200 Ω across the D+ and D− terminals. Shorted or near-shorted data lanes with less than 200 Ω of resistance across the «D+» and «D−» terminals signify a dedicated charging port (DCP) with indefinite charging rates.[83][84]

In addition to standard USB, there is a proprietary high-powered system known as PoweredUSB, developed in the 1990s, and mainly used in point-of-sale terminals such as cash registers.

Signaling[edit]

USB signals are transmitted using differential signaling on a twisted-pair data wires with 90 Ω ± 15% characteristic impedance.[85] USB 2.0 and earlier specifications define a single pair in half-duplex (HDx). USB 3.0 and later specifications define one pair for USB 2.0 compatibility and two or four pairs for data transfer: two pairs in full-duplex (FDx) for single lane variants (requires SuperSpeed connectors); four pairs in full-duplex for dual lane (×2) variants (requires USB-C connector).

Rate Name Old Name First publication (Standard) Encoding Data pairs Nominal
Rate 		USB-IF Marketing
Name[86][87][88] 		Logo
Low-Speed USB 1.0 NRZI 1 HDx 1.5 Mbit/s Basic-Speed USB USB icon.svg
Full-Speed 12 Mbit/s
High-Speed USB 2.0 480 Mbit/s Hi-Speed USB
USB 3.2 Gen 1×1 USB 3.0;
USB 3.1 Gen 1 		USB 3.0 8b/10b 2 FDx 5 Gbit/s SuperSpeed USB 5Gbps USB SuperSpeed 5 Gbps Trident Logo.svg
USB 3.2 Gen 2×1 USB 3.1 Gen 2 USB 3.1 128b/132b 2 FDx 10 Gbit/s SuperSpeed USB 10Gbps USB SuperSpeed 10 Gbps Trident Logo.svg
USB 3.2 Gen 1×2 USB 3.2 8b/10b 4 FDx ×2 10 Gbit/s —
USB 3.2 Gen 2×2 128b/132b 4 FDx ×2 20 Gbit/s SuperSpeed USB 20Gbps USB SuperSpeed 20 Gbps Trident Logo.svg
USB4 Gen 2×1 USB4 64b/66b[a] 2 FDx 10 Gbit/s —
USB4 Gen 2×2 64b/66b[a] 4 FDx ×2 20 Gbit/s USB4 20Gbps USB4 20Gbps Logo.svg
USB4 Gen 3×1 128b/132b[a] 2 FDx 20 Gbit/s —
USB4 Gen 3×2 128b/132b[a] 4 FDx ×2 40 Gbit/s USB4 40Gbps USB4 40Gbps Logo.svg
  1. ^ a b c d USB4 can use optional Reed–Solomon forward error correction (RS FEC). In this mode, 12 × 16 B (128 bit) symbols are assembled together with 2 B (12 bit + 4 bit reserved) synchronisation bits indicating the respective symbol types and 4 B of RS FEC to allow to correct up to 1 B of errors anywhere in the total 198 B block.
  • Low-speed (LS) and Full-speed (FS) modes use a single data pair, labelled D+ and D−, in half-duplex. Transmitted signal levels are 0.0–0.3 V for logical low, and 2.8–3.6 V for logical high level. The signal lines are not terminated.
  • High-speed (HS) mode uses the same wire pair, but with different electrical conventions. Lower signal voltages of −10 to 10 mV for low and 360 to 440 mV for logical high level, and termination of 45 Ω to ground or 90 Ω differential to match the data cable impedance.
  • SuperSpeed (SS) adds two additional pairs of shielded twisted wire (and new, mostly compatible expanded connectors). These are dedicated to full-duplex SuperSpeed operation. The SuperSpeed link operates independently from USB 2.0 channel and takes a precedence on connection. Link configuration is performed using LFPS (Low Frequency Periodic Signaling, approximately at 20 MHz frequency), and electrical features include voltage de-emphasis at transmitter side, and adaptive linear equalization on receiver side to combat electrical losses in transmission lines, and thus the link introduces the concept of link training.
  • SuperSpeed+ (SS+) uses increased data rate (Gen 2×1 mode) and/or the additional lane in the USB-C connector (Gen 1×2 and Gen 2×2 mode).

A USB connection is always between a host or hub at the A connector end, and a device or hub’s «upstream» port at the other end.

Protocol layer[edit]

During USB communication, data is transmitted as packets. Initially, all packets are sent from the host via the root hub, and possibly more hubs, to devices. Some of those packets direct a device to send some packets in reply.

Transactions[edit]

The basic transactions of USB are:

  • OUT transaction
  • IN transaction
  • SETUP transaction
  • Control transfer exchange

Related standards[edit]

Media Agnostic USB[edit]

The USB Implementers Forum introduced the Media Agnostic USB (MA-USB) v.1.0 wireless communication standard based on the USB protocol on July 29, 2015. Wireless USB is a cable-replacement technology, and uses ultra-wideband wireless technology for data rates of up to 480 Mbit/s.[89]

The USB-IF used WiGig Serial Extension v1.2 specification as its initial foundation for the MA-USB specification and is compliant with SuperSpeed USB (3.0 and 3.1) and Hi-Speed USB (USB 2.0). Devices that use MA-USB will be branded as ‘Powered by MA-USB’, provided the product qualifies its certification program.[90]

InterChip USB[edit]

InterChip USB is a chip-to-chip variant that eliminates the conventional transceivers found in normal USB. The HSIC physical layer uses about 50% less power and 75% less board area compared to USB 2.0.[91] It is an alternative standard to SPI and I2C.

USB-C[edit]

USB-C (officially USB Type-C) is a standard that defines a new connector, and several new connection features. Among them it supports Alternate Mode, which allows transporting other protocols via the USB-C connector and cable. This is commonly used to support the DisplayPort or HDMI protocols, which allows connecting a display, such as a computer monitor or television set, via USB-C.

All other connectors were deprecated in USB 3.2.[92]

DisplayLink[edit]

DisplayLink is a technology which allows multiple displays to be connected to a computer via USB. It was introduced around 2006, and before the advent of Alternate Mode over USB-C it was the only way to connect displays via USB. It is a proprietary technology, not standardized by the USB Implementers Forum and typically requires a separate device driver on the computer.

Comparisons with other connection methods[edit]

IEEE 1394[edit]

At first, USB was considered a complement to IEEE 1394 (FireWire) technology, which was designed as a high-bandwidth serial bus that efficiently interconnects peripherals such as disk drives, audio interfaces, and video equipment. In the initial design, USB operated at a far lower data rate and used less sophisticated hardware. It was suitable for small peripherals such as keyboards and pointing devices.

The most significant technical differences between FireWire and USB include:

  • USB networks use a tiered-star topology, while IEEE 1394 networks use a tree topology.
  • USB 1.0, 1.1, and 2.0 use a «speak-when-spoken-to» protocol, meaning that each peripheral communicates with the host when the host specifically requests it to communicate. USB 3.0 allows for device-initiated communications towards the host. A FireWire device can communicate with any other node at any time, subject to network conditions.
  • A USB network relies on a single host at the top of the tree to control the network. All communications are between the host and one peripheral. In a FireWire network, any capable node can control the network.
  • USB runs with a 5 V power line, while FireWire supplies 12 V and theoretically can supply up to 30 V.
  • Standard USB hub ports can provide from the typical 500 mA/2.5 W of current, only 100 mA from non-hub ports. USB 3.0 and USB On-The-Go supply 1.8 A/9.0 W (for dedicated battery charging, 1.5 A/7.5 W full bandwidth or 900 mA/4.5 W high bandwidth), while FireWire can in theory supply up to 60 watts of power, although 10 to 20 watts is more typical.

These and other differences reflect the differing design goals of the two buses: USB was designed for simplicity and low cost, while FireWire was designed for high performance, particularly in time-sensitive applications such as audio and video. Although similar in theoretical maximum transfer rate, FireWire 400 is faster than USB 2.0 high-bandwidth in real-use,[93] especially in high-bandwidth use such as external hard drives.[94][95][96][97] The newer FireWire 800 standard is twice as fast as FireWire 400 and faster than USB 2.0 high-bandwidth both theoretically and practically.[98] However, FireWire’s speed advantages rely on low-level techniques such as direct memory access (DMA), which in turn have created opportunities for security exploits such as the DMA attack.

The chipset and drivers used to implement USB and FireWire have a crucial impact on how much of the bandwidth prescribed by the specification is achieved in the real world, along with compatibility with peripherals.[99]

Ethernet[edit]

The IEEE 802.3af, 802.3at, and 802.3bt Power over Ethernet (PoE) standards specify more elaborate power negotiation schemes than powered USB. They operate at 48 V DC and can supply more power (up to 12.95 W for 802.3af, 25.5 W for 802.3at aka PoE+, 71 W for 802.3bt aka 4PPoE) over a cable up to 100 meters compared to USB 2.0, which provides 2.5 W with a maximum cable length of 5 meters. This has made PoE popular for VoIP telephones, security cameras, wireless access points, and other networked devices within buildings. However, USB is cheaper than PoE provided that the distance is short and power demand is low.

Ethernet standards require electrical isolation between the networked device (computer, phone, etc.) and the network cable up to 1500 V AC or 2250 V DC for 60 seconds.[100] USB has no such requirement as it was designed for peripherals closely associated with a host computer, and in fact it connects the peripheral and host grounds. This gives Ethernet a significant safety advantage over USB with peripherals such as cable and DSL modems connected to external wiring that can assume hazardous voltages under certain fault conditions.[101][102]

MIDI[edit]

The USB Device Class Definition for MIDI Devices transmits Music Instrument Digital Interface (MIDI) music data over USB.[103] The MIDI capability is extended to allow up to sixteen simultaneous virtual MIDI cables, each of which can carry the usual MIDI sixteen channels and clocks.

USB is competitive for low-cost and physically adjacent devices. However, Power over Ethernet and the MIDI plug standard have an advantage in high-end devices that may have long cables. USB can cause ground loop problems between equipment, because it connects ground references on both transceivers. By contrast, the MIDI plug standard and Ethernet have built-in isolation to 500V or more.

eSATA/eSATAp[edit]

The eSATA connector is a more robust SATA connector, intended for connection to external hard drives and SSDs. eSATA’s transfer rate (up to 6 Gbit/s) is similar to that of USB 3.0 (up to 5 Gbit/s) and USB 3.1 (up to 10 Gbit/s). A device connected by eSATA appears as an ordinary SATA device, giving both full performance and full compatibility associated with internal drives.

eSATA does not supply power to external devices. This is an increasing disadvantage compared to USB. Even though USB 3.0’s 4.5 W is sometimes insufficient to power external hard drives, technology is advancing, and external drives gradually need less power, diminishing the eSATA advantage. eSATAp (power over eSATA; aka ESATA/USB) is a connector introduced in 2009 that supplies power to attached devices using a new, backward compatible, connector. On a notebook eSATAp usually supplies only 5 V to power a 2.5-inch HDD/SSD; on a desktop workstation it can additionally supply 12 V to power larger devices including 3.5-inch HDD/SSD and 5.25-inch optical drives.

eSATAp support can be added to a desktop machine in the form of a bracket connecting the motherboard SATA, power, and USB resources.

eSATA, like USB, supports hot plugging, although this might be limited by OS drivers and device firmware.

Thunderbolt[edit]

Thunderbolt combines PCI Express and Mini DisplayPort into a new serial data interface. Original Thunderbolt implementations have two channels, each with a transfer speed of 10 Gbit/s, resulting in an aggregate unidirectional bandwidth of 20 Gbit/s.[104]

Thunderbolt 2 uses link aggregation to combine the two 10 Gbit/s channels into one bidirectional 20 Gbit/s channel.[105]

Thunderbolt 3 uses the USB-C connector.[106][107][108] Thunderbolt 3 has two physical 20 Gbit/s bi-directional channels, aggregated to appear as a single logical 40 Gbit/s bi-directional channel. Thunderbolt 3 controllers can incorporate a USB 3.1 Gen 2 controller to provide compatibility with USB devices. They are also capable of providing DisplayPort alternate mode over the USB-C connector, making a Thunderbolt 3 port a superset of a USB 3.1 Gen 2 port with DisplayPort alternate mode.

DisplayPort Alt Mode 2.0: USB 4 supports DisplayPort 2.0 over its alternative mode. DisplayPort 2.0 can support 8K resolution at 60 Hz with HDR10 color.[109] DisplayPort 2.0 can use up to 80 Gbit/s, which is double the amount available to USB data, because it sends all the data in one direction (to the monitor) and can thus use all eight data lanes at once.[109]

After the specification was made royalty-free and custodianship of the Thunderbolt protocol was transferred from Intel to the USB Implementers Forum, Thunderbolt 3 has been effectively implemented in the USB4 specification—with compatibility with Thunderbolt 3 optional but encouraged for USB4 products.[110]

Interoperability[edit]

Various protocol converters are available that convert USB data signals to and from other communications standards.

Security threats[edit]

Due to the prevalency of the USB standard, there are many exploits using the USB standard. One of the biggest instances of this today is known as the USB Killer, a device which damages devices by sending high voltage pulses across the data lines.

In versions of Microsoft Windows before Windows XP, Windows would automatically run a script (if present) on certain devices via autorun, one of which are USB mass storage devices, which may contain malicious software.[111]

See also[edit]

USB[edit]

  • USB hardware
  • USB protocol
  • USB-C
  • USB hub
  • Extensible Host Controller Interface (XHCI)
  • List of device bit rates#Peripheral
  • WebUSB

Derived and related standards[edit]

  • DockPort
  • Windows Easy Transfer
  • LIO Target
  • Media Transfer Protocol
  • Mobile High-Definition Link
  • Thunderbolt (interface)

References[edit]

  1. ^ «82371FB (PIIX) and 82371SB (PIIX3) PCI ISA IDE Xcelerator» (PDF). Intel. May 1996. Archived from the original (PDF) on 13 March 2016. Retrieved 12 March 2016.
  2. ^ «USB deserves more support». Business. Boston Globe Online. Simson. 31 December 1995. Archived from the original on 6 April 2012. Retrieved 12 December 2011.
  3. ^ Hachman, Mark (4 March 2019). «The new USB4 spec promises a lot: Thunderbolt 3 support, 40Gbps bandwidth, and less confusion». PCWorld. Archived from the original on 27 March 2019. Retrieved 4 March 2019.
  4. ^ a b c d Jan Axelson, USB Complete: The Developer’s Guide, Fifth Edition, Lakeview Research LLC, 2015, ISBN 1931448280, pages 1-7
  5. ^ «Definition of: how to install a PC peripheral». PC. Ziff Davis. Archived from the original on 22 March 2018. Retrieved 17 February 2018.
  6. ^ Huang, Eric (3 May 2018). «To USB or Not to USB: USB Dual Role replaces USB On-The-Go». synopsys.com. Archived from the original on 25 July 2021. Retrieved 21 July 2021.
  7. ^ «Icon design recommendation for Identifying USB 2.0 Ports on PCs, Hosts and Hubs» (PDF). USB. Archived (PDF) from the original on 3 October 2016. Retrieved 26 April 2013..
  8. ^ «Members». Archived from the original on 7 November 2021. Retrieved 7 November 2021.
  9. ^ «Two decades of «plug and play»: How USB became the most successful interface in the history of computing». Archived from the original on 15 June 2021. Retrieved 14 June 2021.
  10. ^ «Intel Fellow: Ajay V. Bhatt». Intel Corporation. Archived from the original on 4 November 2009.
  11. ^ Rogoway, Mark (9 May 2009). «Intel ad campaign remakes researchers into rock stars». The Oregonian. Archived from the original on 26 August 2009. Retrieved 23 September 2009.
  12. ^ Pan, Hui; Polishuk, Paul (eds.). 1394 Monthly Newsletter. Information Gatekeepers. pp. 7–9. GGKEY:H5S2XNXNH99. Archived from the original on 12 November 2012. Retrieved 23 October 2012.
  13. ^ «SuperSpeed USB 3.0: More Details Emerge». PC world. 6 January 2009. Archived from the original on 24 January 2009.
  14. ^ «4.2.1». Universal Serial Bus Specification (PDF) (Technical report). 1996. p. 29. v1.0. Archived (PDF) from the original on 30 January 2018.
  15. ^ «Eight ways the iMac changed computing». Macworld. 15 August 2008. Archived from the original on 22 December 2011. Retrieved 5 September 2017.
  16. ^ «The PC Follows iMac’s Lead». Business week. 1999. Archived from the original on 23 September 2015.
  17. ^ «Popular Mechanics: Making Connections». Popular Mechanics Magazine. Hearst Magazines: 59. February 2001. ISSN 0032-4558. Archived from the original on 15 February 2017.
  18. ^ «High Speed USB Maximum Theoretical Throughput». Microchip Technology Incorporated. 23 March 2021. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  19. ^ «Full Speed USB Maximum Theoretical Throughput». Microchip Technology Incorporated. 23 March 2021. Archived from the original on 23 March 2021. Retrieved 23 March 2021.
  20. ^ «USB 2.0 Specification». USB Implementers Forum. Archived from the original on 3 December 2017. Retrieved 28 April 2019.
  21. ^ «Battery Charging v1.2 Spec and Adopters Agreement» (ZIP). USB Implementers Forum. 7 March 2012. Archived from the original on 6 October 2014. Retrieved 13 May 2021.
  22. ^ «USB 3.0 Specification Now Available» (PDF) (Press release). San Jose, Calif. 17 November 2008. Archived from the original (PDF) on 31 March 2010. Retrieved 22 June 2010 – via usb.org.
  23. ^ a b c d e Universal Serial Bus 3.0 Specification (ZIP). Hewlett-Packard Company Intel Corporation Microsoft Corporation NEC Corporation ST-Ericsson Texas Instruments. 6 June 2011. Archived from the original on 19 May 2014 – via www.usb.org.
    «Universal Serial Bus 3.0 Specification» (PDF). 12 November 2008. Archived (PDF) from the original on 6 October 2012. Retrieved 29 December 2012 – via www.gaw.ru.
  24. ^ «USB 3.0 Technology» (PDF). HP. 2012. Archived from the original on 19 February 2015. Retrieved 2 January 2014.
  25. ^ a b c d «USB 3.1 Specification – Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 12 March 2016 – via www.usb.org.
  26. ^ Silvia (5 August 2015). «USB 3.1 Gen 1 & Gen 2 explained». www.msi.org. Archived from the original on 8 July 2018. Retrieved 5 April 2018.
  27. ^ Universal Serial Bus 3.1 Specification. Hewlett-Packard Company Intel Corporation Microsoft Corporation Renesas Corporation ST-Ericsson Texas Instruments. 26 July 2013. Archived from the original (ZIP) on 21 November 2014. Retrieved 19 November 2014 – via www.usb.org.
  28. ^ «The USB 3.2 Specification released on September 22, 2017 and ECNs». usb.org. 22 September 2017. Archived from the original on 6 July 2019. Retrieved 4 September 2019.
  29. ^ «USB 3.0 Promoter Group Announces USB 3.2 Update» (PDF) (Press release). Beaverton, Oregon, US. 25 July 2017. Archived (PDF) from the original on 21 September 2017. Retrieved 27 July 2017 – via www.usb.org.
  30. ^ «USB 3.2 Specification Language Usage Guidelines from USB-IF» (PDF). usb.org. 26 February 2019. Archived (PDF) from the original on 3 November 2021. Retrieved 4 September 2019.
  31. ^ Ravencraft, Jeff (19 November 2019). «USB DevDays 2019 – Branding Session» (PDF). USB Implementers Forum (Presentation). p. 16. Archived from the original (PDF) on 22 March 2020. Retrieved 22 March 2020.
  32. ^ a b «USB Promoter Group USB4 Specification». usb.org. 29 August 2019. Archived from the original on 13 February 2021. Retrieved 30 August 2019.
  33. ^ Bright, Peter (4 March 2019). «Thunderbolt 3 becomes USB4, as Intel’s interconnect goes royalty-free». Ars Technica. Archived from the original on 13 February 2021. Retrieved 4 March 2019.
  34. ^ Grunin, Lori (4 March 2019). «USB4 marries Thunderbolt 3 for faster speeds and smarter transfers». CNET. Archived from the original on 4 March 2019. Retrieved 4 March 2019.
  35. ^ Brant, Tom (4 March 2019). «Thunderbolt 3 Merges With USB to Become USB4». PC Magazine. Archived from the original on 5 March 2019. Retrieved 4 March 2019.
  36. ^ «USB Promoter Group Announces USB4 Version 2.0 Specification defines delivering up to 80 Gbps over USB Type-C» (PDF).
  37. ^ «USB Data Performance, Language Usage Guidelines from USB-IF» (PDF). Retrieved 2 September 2022.
  38. ^ Matt Elliot (11 March 2019). «USB 3.2 explained: Making sense of current and confusing USB standards». CNET. Archived from the original on 27 July 2017. Retrieved 26 July 2022.
  39. ^ «USB4® Specification v2.0 | USB-IF».
  40. ^ «Battery Charging v1.1 Spec and Adopters Agreement». USB.org. Archived from the original on 11 January 2021. Retrieved 31 July 2019.
  41. ^ «Battery Charging v1.2 Spec and Adopters Agreement». USB.org. Archived from the original on 31 July 2019. Retrieved 31 July 2019.
  42. ^ «USB Power Delivery». USB.org. Archived from the original on 3 September 2019. Retrieved 3 September 2019.
  43. ^ «USB Type-C Cable and Connector Specification Revision 2.1». USB.org. Archived from the original on 27 May 2021. Retrieved 27 May 2021.
  44. ^ a b «USB Power Delivery». USB.org. Archived from the original on 27 May 2021. Retrieved 27 May 2021.
  45. ^ «Universal Serial Bus Specification Revision 2.0». USB.org. 11 October 2011. pp. 13, 30, 256. Archived from the original (ZIP) on 28 May 2012. Retrieved 8 September 2012.
  46. ^ Dan Froelich (20 May 2009). «Isochronous Protocol» (PDF). USB.org. Archived from the original (PDF) on 17 August 2014. Retrieved 21 November 2014.
  47. ^ «USB Class Codes». 22 September 2018. Archived from the original on 22 September 2018 – via www.usb.org.
  48. ^ Use class information in the interface descriptors. This base class is defined to use in device descriptors to indicate that class information should be determined from the Interface Descriptors in the device.
  49. ^ «Universal Serial Bus Test and Measurement Class Specification (USBTMC) Revision 1.0» (PDF). USB Implementers Forum. 14 April 2003. Archived (PDF) from the original on 23 December 2018. Retrieved 10 May 2018 – via sdpha2.ucsd.edu.
  50. ^ a b «Universal Serial Bus Device Class Specification for Device Firmware Upgrade, Version 1.1» (PDF). USB Implementers Forum. 15 October 2004. pp. 8–9. Archived (PDF) from the original on 11 October 2014. Retrieved 8 September 2014.
  51. ^ «100 Portable Apps for your USB Stick (both for Mac and Win)». Archived from the original on 2 December 2008. Retrieved 30 October 2008.
  52. ^ «Skype VoIP USB Installation Guide». Archived from the original on 6 July 2014. Retrieved 30 October 2008.
  53. ^ «PS/2 to USB Keyboard and Mouse Adapter». StarTech.com. Archived from the original on 12 November 2014.
  54. ^ «Universal Serial Bus Device Class Specification for Device Firmware Upgrade, Version 1.0» (PDF). USB Implementers Forum. 13 May 1999. pp. 7–8. Archived from the original (PDF) on 24 August 2014. Retrieved 8 September 2014.
  55. ^ «rpms/dfu-util: USB Device Firmware Upgrade tool». fedoraproject.org. 14 May 2014. Archived from the original on 8 September 2014. Retrieved 8 September 2014.
  56. ^ Karsten Nohl; Sascha Krißler; Jakob Lell (7 August 2014). «BadUSB – On accessories that turn evil» (PDF). srlabs.de. Security Research Labs. Archived from the original (PDF) on 8 August 2014. Retrieved 8 September 2014.
  57. ^ «USB-IF Announces USB Audio Device Class 3.0 Specification». Business Wire (Press release). Houston, Texas & Beaverton, Oregon. 27 September 2016. Archived from the original on 4 May 2018. Retrieved 4 May 2018.
  58. ^ «USB Device Class Specifications». www.usb.org. Archived from the original on 13 August 2014. Retrieved 4 May 2018.
  59. ^ a b c d e f Strong, Laurence (2015). «Why do you need USB Audio Class 2?» (PDF). XMOS. Archived from the original (PDF) on 24 November 2017. Retrieved 11 December 2020. In applications where streaming latency is important, UAC2 offers up to an 8x reduction over UAC1. … Each clocking method has pros and cons and best-fit applications.
  60. ^ «USB Audio 2.0 Drivers». Microsoft Hardware Dev Center. Archived from the original on 4 May 2018. Retrieved 4 May 2018. ADC-2 refers to the USB Device Class Definition for Audio Devices, Release 2.0.
  61. ^ «New USB Audio Class for USB Type-C Digital Headsets». Synopsys.com. Archived from the original on 7 May 2018. Retrieved 7 May 2018.
  62. ^ a b Kars, Vincent (May 2011). «USB». The Well-Tempered Computer. Archived from the original on 7 May 2018. Retrieved 7 May 2018. All operating systems (Win, OSX, and Linux) support USB Audio Class 1 natively. This means you don’t need to install drivers, it is plug&play.
  63. ^ «Fundamentals of USB Audio» (PDF). www.xmos.com. XMOS Ltd. 2015. Retrieved 10 December 2020. Note that Full Speed USB has a much higher intrinsic latency of 2ms
  64. ^ a b «This Just In: Microsoft Launches Native Class 2 USB Audio Support. Wait, What?». Computer Audiophile. Archived from the original on 2 September 2018. Retrieved 7 May 2018. Class 2 support enables much higher sample rates such as PCM 24 bit / 384 kHz and DSD (DoP) up through DSD256.
  65. ^ «Announcing Windows 10 Insider Preview Build 14931 for PC». Windows Experience Blog. 21 September 2016. Archived from the original on 23 September 2016. Retrieved 7 May 2018. We now have native support for USB Audio 2.0 devices with an inbox class driver! This is an early version of the driver that does not have all features enabled
  66. ^ Plummer, Gregg (20 September 2017). «Ampliozone: USB Audio Class 2.0 Support in Windows 10, FINALLY!!!!». Ampliozone. Archived from the original on 7 May 2018. Retrieved 7 May 2018.
  67. ^ a b «USB Digital Audio». Android Open Source Project. Retrieved 16 February 2023. Synchronous sub-mode is not commonly used with audio because both host and peripheral are at the mercy of the USB clock.{{cite web}}: CS1 maint: url-status (link)
  68. ^ «32-bit Atmel Microcontroller Application Note» (PDF). Atmel Corporation. 2011. Archived (PDF) from the original on 6 May 2016. Retrieved 13 April 2016.
  69. ^ «PCM2906C datasheet» (PDF). Texas Instruments. November 2011. Archived (PDF) from the original on 4 May 2018. Retrieved 4 May 2018. The PCM2906C employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data.
  70. ^ Castor-Perry, Kendall (October 2010). «Designing Modern USB Audio Systems». Cypress Semiconductor. Archived from the original on 5 May 2018. Retrieved 4 May 2018.
  71. ^ a b Castor-Perry, Kendall (2011). «Programmable Clock Generation and Synchronization for USB Audio Systems». Cypress Semiconductor. Archived from the original on 4 May 2018. Retrieved 4 May 2018. Early USB replay interfaces used synchronous mode but acquired a reputation for poor quality of the recovered clock (and resultant poor replay quality). This was primarily due to deficiencies of clocking implementation rather than inherent shortcomings of the approach.
  72. ^ Kondoh, Hitoshi (20 February 2002). «The D/A diaries: A personal memoir of engineering heartache and triumph» (PDF). Archived (PDF) from the original on 12 December 2019. Retrieved 4 May 2018. The fact that there is no clock line within the USB cable leads to a thinner cable, which is an advantage. But, no matter how good the crystal oscillators are at the send and receive ends, there will always be some difference between the two…
  73. ^ «USB 2.0 Documents». www.usb.org. Archived from the original on 3 December 2017. Retrieved 7 May 2018.
  74. ^ «Our Guide to USB Audio — Why Should I Use it?». Cambridge Audio. Archived from the original on 7 May 2018. Retrieved 7 May 2018. Synchronous USB DAC is the lowest quality of the three … Adaptive … means that there is no continuous, accurate master clock in the DAC, which causes jitter in the audio stream. … Asynchronous – this is the most complex to implement but it is a huge improvement on the other types.
  75. ^ Kars, Vincent (July 2012). «USB versus USB». The Well-Tempered Computer. Archived from the original on 22 April 2018. Retrieved 7 May 2018. Synchronous is not used in a quality DAC as it is very jittery. … asynchronous is the better of these modes.
  76. ^ «Low-Jitter USB: Dan Lavry, Michael Goodman, Adaptive, Asynchronous». Headphone Reviews and Discussion — Head-Fi.org. Archived from the original on 7 May 2018. Retrieved 7 May 2018. Some manufacturers may lead you to believe that Asynchronous USB transfers are superior to Adaptive USB transfers and that therefore you must believe in the asynchronous solution. This no more true than saying that you «must» hold the fork in your left hand. In fact, if you know what you are doing, you will feed yourself with either hand. The issue is really about good engineering practices.
  77. ^ «USB 2.0 Specification Engineering Change Notice (ECN) #1: Mini-B connector» (PDF). 20 October 2000. Archived (PDF) from the original on 12 April 2015. Retrieved 29 December 2014 – via www.usb.org.
  78. ^ «USB Cable Length Limitations» (PDF). CablesPlusUSA.com. 3 November 2010. Archived from the original (PDF) on 11 October 2014. Retrieved 2 February 2014.
  79. ^ «What is the Maximum Length of a USB Cable?». Techwalla.com. Archived from the original on 1 December 2017. Retrieved 18 November 2017.
  80. ^ a b «Cables and Long-Haul Solutions». USB 2.0 Frequently Asked Questions. USB Implementers Forum. Archived from the original on 18 January 2011. Retrieved 28 April 2019.
  81. ^ Axelson, Jan. «USB 3.0 Developers FAQ». Archived from the original on 20 December 2016. Retrieved 20 October 2016.
  82. ^ «USB 3.1 — Type-C Host to Host». superuser.com. Archived from the original on 14 October 2021. Retrieved 21 July 2021.
  83. ^ «Parameter Values». Battery Charging Specification, Revision 1.2. USB Implementers Forum. 7 December 2010. p. 45. Archived from the original on 28 March 2016. Retrieved 29 March 2016.
  84. ^ «OVERVIEW OF USB BATTERY CHARGING REVISION 1.2 AND THE IMPORTANT ROLE OF ADAPTER EMULATORS» (PDF). maxim integrated. 2014. p. 3. Archived (PDF) from the original on 4 July 2021. Retrieved 12 August 2021.
  85. ^ «USB in a NutShell – Chapter 2: Hardware». Beyond Logic.org. Archived from the original on 20 August 2007. Retrieved 25 August 2007.
  86. ^ «USB Logo Usage Guidelines» (PDF). USB Implementers Forum. Archived (PDF) from the original on 9 January 2022. Retrieved 13 February 2022.
  87. ^ «USB 3.2 Specification Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 3 November 2021. Retrieved 4 September 2019.
  88. ^ «USB4 Specification Language Usage Guidelines from USB-IF» (PDF). Archived (PDF) from the original on 13 November 2021. Retrieved 13 February 2022.
  89. ^ «Media Agnostic USB v1.0a Spec and Adopters Agreement». usb.org. Archived from the original on 31 July 2021. Retrieved 21 July 2021.
  90. ^ Shaikh, Roshan Ashraf (3 November 2020). «USB-IF releases final specification of Media Agnostic USB». tweaktown.com. Archived from the original on 15 March 2021. Retrieved 21 July 2021.
  91. ^ Shuler, Kurt (31 March 2011). «Interchip Connectivity: HSIC, UniPro, HSI, C2C, LLI… oh my!». Arteris IP. Archived from the original on 19 June 2011. Retrieved 24 June 2011.
  92. ^ «USB 3.2 and Beyond». Black Box. Retrieved 4 March 2023.
  93. ^ «FireWire vs. USB 2.0» (PDF). QImaging. Archived (PDF) from the original on 11 October 2010. Retrieved 20 July 2010.
  94. ^ «FireWire vs. USB 2.0 – Bandwidth Tests». Archived from the original on 12 August 2007. Retrieved 25 August 2007.
  95. ^ «USB 2.0 vs FireWire». Pricenfees. Archived from the original on 16 October 2016. Retrieved 25 August 2007.
  96. ^ Metz, Cade (25 February 2003). «The Great Interface-Off: FireWire Vs. USB 2.0». PC Magazine. Archived from the original on 30 September 2007. Retrieved 25 August 2007.
  97. ^ Heron, Robert. «USB 2.0 Versus FireWire». TechTV. Archived from the original on 29 September 2007. Retrieved 25 August 2007.
  98. ^ «FireWire vs. USB 2.0». USB Ware. Archived from the original on 16 March 2007. Retrieved 19 March 2007.
  99. ^ Key, Gary (15 November 2005). «Firewire and USB Performance». Archived from the original on 23 April 2008. Retrieved 1 February 2008.
  100. ^ «802.3, Section 14.3.1.1» (PDF). IEEE. Archived (PDF) from the original on 6 December 2010.
  101. ^ «Powerbook Explodes After Comcast Plugs in Wrong Cable». Consumerist. 8 March 2010. Archived from the original on 25 June 2010. Retrieved 22 June 2010.
  102. ^ «Technical Note. Galvanic Isolation» (PDF). iSYSTEM. 2021. Archived (PDF) from the original on 21 December 2021. Retrieved 13 February 2022.
  103. ^ «Universal Serial Bus Device Class Definition for MIDI Devices» (PDF). usb.org. 1 November 1999. Archived (PDF) from the original on 2 November 2021. Retrieved 21 July 2021.
  104. ^ «How Thunderbolt Technology Works: Thunderbolt Technology Community». ThunderboltTechnology.net. Archived from the original on 10 February 2014. Retrieved 22 January 2014.
  105. ^ Galbraith, Jim (2 January 2014). «What you need to know about Thunderbolt 2». Macworld. IDG Communications, Inc. Archived from the original on 24 June 2021. Retrieved 18 June 2021.
  106. ^ «One port to rule them all: Thunderbolt 3 and USB Type-C join forces». Archived from the original on 2 June 2015. Retrieved 2 June 2015.
  107. ^ «Thunderbolt 3 is twice as fast and uses reversible USB-C». Archived from the original on 3 June 2015. Retrieved 2 June 2015.
  108. ^ Sebastian Anthony (2 June 2015). «Thunderbolt 3 embraces USB Type-C connector, doubles bandwidth to 40 Gbps». Ars Technica. Archived from the original on 9 June 2015. Retrieved 2 June 2015.
  109. ^ a b Porter, Jon (30 April 2020). «New DisplayPort spec enables 16K video over USB-C». The Verge. Vox Media, LLC. Archived from the original on 15 April 2021. Retrieved 18 June 2021.
  110. ^ «USB4™ Thunderbolt3™ Compatibility Requirements Specification» (PDF). USB. USB.org. January 2021. Archived (PDF) from the original on 19 October 2021. Retrieved 1 January 2021.
  111. ^ «Using AutoRun with a USB Flash Drive (USB stick)». Positive Technologies. 25 June 2022. Archived from the original on 26 April 2022. Retrieved 26 July 2022.

Further reading[edit]

  • Axelson, Jan (1 September 2006). USB Mass Storage: Designing and Programming Devices and Embedded Hosts (1st ed.). Lakeview Research. ISBN 978-1-931-44804-8.
  • ——— (1 December 2007). Serial Port Complete: COM Ports, USB Virtual COM Ports, and Ports for Embedded Systems (2nd ed.). Lakeview Research. ISBN 978-1-931-44806-2.
  • ——— (2015). USB Complete: The Developer’s Guide (5th ed.). Lakeview Research. ISBN 978-1-931448-28-4.
  • Hyde, John (February 2001). USB Design by Example: A Practical Guide to Building I/O Devices (2nd ed.). Intel Press. ISBN 978-0-970-28465-5.
  • «Debugging USB 2.0 for Compliance: It’s Not Just a Digital World» (PDF). Keysight Technologies. Technologies Application Note. Keysight (1382–3).

External links[edit]

General overview[edit]

  • Joel Johnson (29 May 2019). «The unlikely origins of USB, the port that changed everything». Fast Company.
  • Leigh, Peter (24 May 2020). Why Does USB Keep Changing? (video).
  • Parikh, Bijal. «USB (Universal Serial Bus): An Overview». Engineers Garage. WTWH Media. Retrieved 7 May 2022.
  • Barnatt, Christopher (25 September 2022). Explaining USB: From 1.0 to USB4 V2.0 (ExplainingComputers) (video).

Technical documents[edit]

  • «USB Implementers Forum (USB-IF)». USB.org.
  • «USB Document Library (USB 3.2, USB 2.0, Wireless USB, USB-C, USB Power Delivery)». USB.org.
  • «Universal Host Controller Interface (UHCI)» (PDF). Intel – via mit.edu.
  • «USB 3.0 Standard-A, Standard-B, Powered-B connectors». Pinouts guide. Archived from the original on 14 May 2016.
  • Muller, Henk (July 2012). «How To Create And Program USB Devices». Electronic Design.
  • Garney, John (June 1996). «An Analysis of Throughput Characteristics of Universal Serial Bus» (PDF).
  • Hershenhoren, Razi; Reznik, Omer (October 2010). «USB 2.0 Protocol Engine» (PDF).
  • IEC 62680 (Universal Serial Bus interfaces for data and power):
    • IEC 62680-1.1:2015 — Part 1-1: Common components — USB Battery Charging Specification, Revision 1.2
    • IEC 62680-1-2:2018 — Part 1-2: Common components — USB Power Delivery specification
    • IEC 62680-1-3:2018 — Part 1-3: Common components — USB Type-C Cable and Connector Specification
    • IEC 62680-1-4:2018 — Part 1-4: Common components — USB Type-C Authentication Specification
    • IEC 62680-2-1:2015 — Part 2-1: Universal Serial Bus Specification, Revision 2.0
    • IEC 62680-2-2:2015 — Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01
    • IEC 62680-2-3:2015 — Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0
    • IEC 62680-3-1:2017 — Part 3-1: Universal Serial Bus 3.1 Specification
Источник

Всего найдено: 12

Добрый день. Вышел спор с коллегами как правильно писать в документе, с кавычками или без. И требуется-ли ставить точку: Приложения: 1. Приложение 1. «название приложения». 2. Приложение 2. «название приложения». ИЛИ Приложения: 1. Приложение 1 название приложения 2. Приложение 2 название приложения

Ответ справочной службы русского языка

ГОСТ Р 7.0.97-2016 предписывает такой вариант оформления:

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» alt=»» width=»653″ height=»112″ />

Здравствуйте! У меня вопрос по поводу употребления кавычек в названиях станций. Я всегда думала, что они обязательны, а тут узнала, что якобы в названии станций метро и МЦД их нужно ставить (метро «Комсомольская», «Нахабино»), а в названий железнодорожных станций — нет. Мне это кажется странным. При перечислении тогда будет выглядеть: станция «Одинцово» (МЦД), станция Голицыно (не МЦД), станция «Кунцево» (МЦД)? Есть справочник, где это зафиксировано, можете подсказать? Заранее спасибо. С уважением, Наталья.

Ответ справочной службы русского языка

Написание названий железнодорожных станций и станций метрополитена было регламентировано давно. В полном академическом справочнике «Правила русской орфографии и пунктуации» под ред. В. В. Лопатина сформулировано правило:

«В названиях железнодорожных станций, вокзалов, аэропортов и т. п. с прописной буквы пишутся все слова, кроме родовых обозначений, напр.: станция Москва-Пассажирская, Казанский вокзал, аэропорты Шереметьево, Внуково.

Названия станций метро, остановок наземного городского транспорта заключаются в кавычки (в текстах, но не на картах и схемах); с прописной буквы пишется первое (или единственное) слово таких названий, а также все те слова, которые пишутся с прописной буквы в составе соответствующих топонимов, напр.: станции метро «Александровский сад», «Октябрьское Поле», «Проспект Мира»; остановки «Никитские Ворота», «Улица Лесная», «Школа», «Детская поликлиника»» (§ 175).

Эта норма сформировалась вследствие того, что названия железнодорожных станций часто совпадают с названиями населенных пунктов, указывая одновременно и на станции и на населенные пункты, имена которых в кавычки не заключаются. Условных названий, которые по общему правилу можно было бы писать в кавычках, немного.

Большинство названий станций метро условны, часто они образуются от названий внутригородских объектов. Такие названия удобнее писать в кавычках. (Подробнее о кавычках в названиях железнодорожных станций и станций метро можно прочитать в статье В. М. Пахомова «usbiz.ru/article_index.html?cat=6&id=5487″ target=»_blank» rel=»noopener noreferrer»>Не забудь… станция Луговая»).

Когда появилась сеть МЦД, возник вопрос о кавычках в названиях станций. Было принято написание в кавычках по аналогии со станциями метро.

вЕнтилятор — проверочное слово вентиль?

Ответ справочной службы русского языка

Вентиль, вентилировать, вентилятор – родственные слова, они восходят к лат. ventilo «развеиваю, проветриваю», в них выделяется корень вентил(ь)-. Родство слов ощущается носителями русского языка. Это дает орфографистам  основание считать слово вентиль проверочным для вентилировать и вентилятор. См. здесь.

Однако найти у слов вентиль, вентилировать, вентилятор общий смысловой компонент, который однозначно бы показывал, что они однокоренные, затруднительно. Вентилятор – устройство для проветривания помещений или охлаждения воздуха, двигателей и т.п.; вентилировать – производить вентиляцию. Вентиль – клапан для регулирования расхода жидкости, пара, газа и т.п.  

                                 Намотать жару на вентилятор: недорогие варианты для дома / Умные вещи                         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» alt=»Вентиль (клапан) запорный проходной латунный муфтовый 15б1п» width=»75″ height=»75″ />

Поэтому в современном русском языке эти слова все же однокоренными признать нельзя, а значит, и проверять слова вентилировать, вентилятор словом вентиль неправильно. Но опереться на слово вентиль, чтобы запомнить, как пишутся родственные слова вполне можно. Эту проверку условно можно назвать этимологической.

Добрый день! USB совместимый в «USB совместимое устройство» пишется через дефис или раздельно? Тот же вопрос с «LED телевизором». Благодарю.

Ответ справочной службы русского языка

В обоих случаях используется дефис.

Добрый день!
Подскажите, пожалуйста, корректное написание
USB CD-привод.
Огромное спасибо!

Ответ справочной службы русского языка

Корректно: USB-CD-привод. Но лучше написать иначе:  CD-привод USB.

Добрый день!
Будьте любезны, подскажите корректное написание
USB флеш-накопитель.
Большое спасибо!

Ответ справочной службы русского языка

Корректно дефисное написание: USB-флеш-накопитель.

Здравствуйте.
В словарях нет слова «флешка», есть только «флеш-память» (flash memory). Но технически это разные понятия. В Википедии это «USB-флеш-накопитель». В технической литературе пишут «USB-флеш», иногда и «флешка» (бывает и «флэшка»).
Как, по вашему мнению, правильно?
Спасибо.

Ответ справочной службы русского языка

Конечно, слова типа флешка, открывашка, промокашка активно образуются в разговорной речи и, соответственно, имеют разговорную окраску. Флеш-накопитель — более грамотное с технической точки зрения наименование.

Добрый день,
подскажите,
1) нужен ли дефис в словах типа РЧ-сигнал, УВЧ-спектр?
2) Как более грамотно: USB-порт, или порт USB?
3) Нужен ли дефис при переводе таких иностранных названий, как, например, San Martin Street (Сан-Мартин-Стрит)?

Ответ справочной службы русского языка

1. Дефис нужен.

2. Лучше: порт USB.

3. Да, дефис нужен.

добрый день!
Уточните, пожалуйста, где ставится ударение во множественном числе USB-пОрты или USB-портЫ

Екатерина

Ответ справочной службы русского языка

Предпочтительно: USB-пОрты.

как писать USB кабель, слитно, через дифис или раздельно? тоже самое USB порт?
как писать стерео наушники, стерео система, слитно или раздельно?

Ответ справочной службы русского языка

Правильно: USB-кабель, USB-порт, стереонаушники, стереосистема.

Добрый день. Хотелось бы узнать, как правильно написать «мини-USB-порт». Все через дефис? Или раздельно? Очень надеюсь на ответ.

Ответ справочной службы русского языка

Да, корректно написание с двумя дефисами. Вы написали верно.

Скажите, пожалуйста, нужна ли запятая перед союзом «И»:

Если вы используете съемный диск, вставьте дискету в дисковод, а съемный диск в разъем USB-порта, и нажмите кнопку «Диск».

Спасибо!

Ответ справочной службы русского языка

Запята перед _и_ не нужна.

Источник

Содержание

  1. Поиск ответа
  2. Поиск ответа
  3. 4 Различных типа USB-кабелей [и их разновидности]
  4. Где используется USB?
  5. Преимущества интерфейса USB
  6. Типы USB в зависимости от их версии
  7. USB 3.0
  8. USB4 или USB 4.0
  9. Типы USB-кабелей [в зависимости от их физической структуры]
  10. USB Тип-A
  11. USB Тип-B
  12. USB Mini и Micro типа B
  13. USB OTG
  14. Что в будущем?

Поиск ответа

Всего найдено: 5

Добрый день,
подскажите,
1) нужен ли дефис в словах типа РЧ-сигнал, УВЧ-спектр?
2) Как более грамотно: USB-порт , или порт USB?
3) Нужен ли дефис при переводе таких иностранных названий, как, например, San Martin Street (Сан-Мартин-Стрит)?

Ответ справочной службы русского языка

2. Лучше: порт USB.

добрый день!
Уточните, пожалуйста, где ставится ударение во множественном числе USB-пОрт ы или USB-порт Ы

Ответ справочной службы русского языка

как писать USB кабель, слитно, через дифис или раздельно? тоже самое USB порт?
как писать стерео наушники, стерео система, слитно или раздельно?

Ответ справочной службы русского языка

Правильно: USB-кабель, USB-порт , стереонаушники, стереосистема .

Добрый день. Хотелось бы узнать, как правильно написать «мини- USB-порт «. Все через дефис? Или раздельно? Очень надеюсь на ответ.

Ответ справочной службы русского языка

Да, корректно написание с двумя дефисами. Вы написали верно.

Скажите, пожалуйста, нужна ли запятая перед союзом «И»: Если вы используете съемный диск, вставьте дискету в дисковод, а съемный диск в разъем USB-порт а, и нажмите кнопку «Диск». Спасибо!

Ответ справочной службы русского языка

Источник

Поиск ответа

Всего найдено: 12

Добрый день. Вышел спор с коллегами как правильно писать в документе, с кавычками или без. И требуется-ли ставить точку: Приложения: 1. Приложение 1. «название приложения». 2. Приложение 2. «название приложения». ИЛИ Приложения: 1. Приложение 1 название приложения 2. Приложение 2 название приложения

Ответ справочной службы русского языка

ГОСТ Р 7.0.97-2016 предписывает такой вариант оформления:

usb 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» alt=»» width=»653″ height=»112″/>

Здравствуйте! У меня вопрос по поводу употребления кавычек в названиях станций. Я всегда думала, что они обязательны, а тут узнала, что якобы в названии станций метро и МЦД их нужно ставить (метро «Комсомольская», «Нахабино»), а в названий железнодорожных станций — нет. Мне это кажется странным. При перечислении тогда будет выглядеть: станция «Одинцово» (МЦД), станция Голицыно (не МЦД), станция «Кунцево» (МЦД)? Есть справочник, где это зафиксировано, можете подсказать? Заранее спасибо. С уважением, Наталья.

Ответ справочной службы русского языка

Написание названий железнодорожных станций и станций метрополитена было регламентировано давно. В полном академическом справочнике «Правила русской орфографии и пунктуации» под ред. В. В. Лопатина сформулировано правило:

« В названиях железнодорожных станций, вокзалов, аэропортов и т. п. с прописной буквы пишутся все слова, кроме родовых обозначений, напр.: станция Москва-Пассажирская, Казанский вокзал, аэропорты Шереметьево, Внуково.

Названия станций метро, остановок наземного городского транспорта заключаются в кавычки (в текстах, но не на картах и схемах); с прописной буквы пишется первое (или единственное) слово таких названий, а также все те слова, которые пишутся с прописной буквы в составе соответствующих топонимов, напр.: станции метро «Александровский сад», «Октябрьское Поле», «Проспект Мира»; остановки «Никитские Ворота», «Улица Лесная», «Школа», «Детская поликлиника» » (§ 175).

Эта норма сформировалась вследствие того, что названия железнодорожных станций часто совпадают с названиями населенных пунктов, указывая одновременно и на станции и на населенные пункты, имена которых в кавычки не заключаются. Условных названий, которые по общему правилу можно было бы писать в кавычках, немного.

Большинство названий станций метро условны, часто они образуются от названий внутригородских объектов. Такие названия удобнее писать в кавычках. (Подробнее о кавычках в названиях железнодорожных станций и станций метро можно прочитать в статье В. М. Пахомова «usb iz.ru/article_index.html?cat=6&id=5487″ target=»_blank» rel=»noopener noreferrer»>Не забудь… станция Луговая»).

Когда появилась сеть МЦД, возник вопрос о кавычках в названиях станций. Было принято написание в кавычках по аналогии со станциями метро.

вЕнтилятор — проверочное слово вентиль?

Ответ справочной службы русского языка

Вентиль, вентилировать, вентилятор – родственные слова, они восходят к лат. ventilo «развеиваю, проветриваю», в них выделяется корень вентил(ь)-. Родство слов ощущается носителями русского языка. Это дает орфографистам основание считать слово вентиль проверочным для вентилировать и вентилятор. См. здесь.

Однако найти у слов вентиль, вентилировать, вентилятор общий смысловой компонент, который однозначно бы показывал, что они однокоренные, затруднительно. Вентилятор – устройство для проветривания помещений или охлаждения воздуха, двигателей и т.п.; вентилировать – производить вентиляцию. Вентиль – клапан для регулирования расхода жидкости, пара, газа и т.п.

uSb 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» alt=»Вентиль (клапан) запорный проходной латунный муфтовый 15б1п» width=»75″ height=»75″/>

Поэтому в современном русском языке эти слова все же однокоренными признать нельзя, а значит, и проверять слова вентилировать, вентилятор словом вентиль неправильно. Но опереться на слово вентиль, чтобы запомнить, как пишутся родственные слова вполне можно. Эту проверку условно можно назвать этимологической.

Добрый день! USB совместимый в » USB совместимое устройство» пишется через дефис или раздельно? Тот же вопрос с «LED телевизором». Благодарю.

Ответ справочной службы русского языка

В обоих случаях используется дефис.

Добрый день!
Подскажите, пожалуйста, корректное написание
USB CD-привод.
Огромное спасибо!

Ответ справочной службы русского языка

Корректно: USB -CD-привод. Но лучше написать иначе: CD-привод USB .

Добрый день!
Будьте любезны, подскажите корректное написание
USB флеш-накопитель.
Большое спасибо!

Ответ справочной службы русского языка

Корректно дефисное написание: USB -флеш-накопитель .

Здравствуйте.
В словарях нет слова «флешка», есть только «флеш-память» (flash memory). Но технически это разные понятия. В Википедии это » USB -флеш-накопитель». В технической литературе пишут » USB -флеш», иногда и «флешка» (бывает и «флэшка»).
Как, по вашему мнению, правильно?
Спасибо.

Ответ справочной службы русского языка

Конечно, слова типа флешка, открывашка, промокашка активно образуются в разговорной речи и, соответственно, имеют разговорную окраску. Флеш-накопитель — более грамотное с технической точки зрения наименование.

Добрый день,
подскажите,
1) нужен ли дефис в словах типа РЧ-сигнал, УВЧ-спектр?
2) Как более грамотно: USB -порт, или порт USB ?
3) Нужен ли дефис при переводе таких иностранных названий, как, например, San Martin Street (Сан-Мартин-Стрит)?

Ответ справочной службы русского языка

2. Лучше: порт USB .

добрый день!
Уточните, пожалуйста, где ставится ударение во множественном числе USB -пОрты или USB -портЫ

Ответ справочной службы русского языка

как писать USB кабель, слитно, через дифис или раздельно? тоже самое USB порт?
как писать стерео наушники, стерео система, слитно или раздельно?

Ответ справочной службы русского языка

Правильно: USB -кабель, USB -порт, стереонаушники, стереосистема .

Добрый день. Хотелось бы узнать, как правильно написать «мини- USB -порт». Все через дефис? Или раздельно? Очень надеюсь на ответ.

Ответ справочной службы русского языка

Да, корректно написание с двумя дефисами. Вы написали верно.

Скажите, пожалуйста, нужна ли запятая перед союзом «И»: Если вы используете съемный диск, вставьте дискету в дисковод, а съемный диск в разъем USB -порта, и нажмите кнопку «Диск». Спасибо!

Ответ справочной службы русского языка

Источник

4 Различных типа USB-кабелей [и их разновидности]

USB или универсальная последовательная шина — это стандартный тип соединения и среда связи между широким спектром электрических устройств, включая компьютеры и периферийные устройства.

Она была введена в эксплуатацию в 1996 году. Идея заключалась в стандартизации связи или передачи данных между периферийными устройствами и компьютерами путем замены старых интерфейсов связи, таких как параллельные и последовательные порты (не путайте их с процессом связи/передачи данных) и FireWire.

Знаете ли вы? Стандарт USB регулируется Форумом разработчиков USB (USB-IF), учрежденным компаниями-основателями, включая IBM, Intel, Microsoft и Nortel.

Где используется USB?

В качестве отраслевого стандарта кабели USB используются для подключения настольных или портативных компьютеров к внешним аппаратным устройствам, таким как клавиатуры, мыши, флэш-накопители, принтеры и игровые контроллеры.

Интерфейс USB стал настолько популярным в последние годы, что вы можете легко найти их даже в автомобилях и электрических розетках в домах. Современные смартфоны, планшетные компьютеры и многие портативные устройства теперь поддерживают USB-кабели и разъемы для быстрой зарядки по сравнению с другими типами кабелей.

Преимущества интерфейса USB

  • Хотя USB был в первую очередь разработан для нормализации связи между персональными компьютерами и вспомогательными устройствами, существует несколько других преимуществ интерфейса USB.
  • Он является самонастраивающимся, а это означает, что нет необходимости настраивать/конфигурировать его параметры перед использованием.
  • USB-устройства могут быть добавлены или заменены в систему без выключения или перезагрузки системы (с возможностью горячей замены).
  • Его способность к электропитанию позволяет питать небольшие устройства без дополнительного кабеля питания.
  • Протокол передачи данных USB и получение сигналов всегда надежны независимо от их версии.

Типы USB в зависимости от их версии

Есть два способа классификации USB-кабеля; на основе его версии или поколения, которая касается функциональности (скорости передачи данных) кабеля, и по его физической конструкции.

Прежде чем приступить к рассмотрению различных типов USB-кабелей, давайте сначала разберемся с несколькими терминами, связанными с ними. Типичный USB-кабель имеет два разъёма, по одному с каждой стороны. Один — для хоста, к которому относятся все типы компьютеров (ПК, планшеты), а другой — для приемника, любого портативного устройства (смартфона), на которое необходимо перенести данные. Слот, в который вставлен USB, называется портом или розеткой. Как бы то ни было, давайте перейдем к делу.

С 1996 года были представлены четыре основных версии или поколения стандартов USB. Это USB 1.0, USB 2.0, USB 3.0 и USB4. USB4 — самый последний.

Таблица, показывающая различные версии USB и поддерживаемые ими скорости передачи.

Оригинальный USB, USB 1.0, поддерживает двухскоростную шину со скоростью передачи данных 1,5 Мбит/с для недорогих устройств с низкой скоростью передачи данных (клавиатуры, мыши) и 12 Мбит/с для устройств с высокой скоростью передачи данных (принтеры, дисководы). Эта архитектура с несколькими шинами расширена до USB 2.0 (запущен в 2001 г.). Однако была добавлена ​​третья, «высокоскоростная» шина с максимальной скоростью передачи данных 480 Мбит/с.

Универсальная последовательная шина впервые привлекла внимание в 1988 году (когда был представлен USB 1.1) с выпуском Apple iMac. Это был первый широко известный продукт с технологией USB. Вскоре производители ПК последовали их примеру, заменив устаревшие порты на USB в своих продуктах. Таким образом, первоначальный успех USB связан с успехом iMac.

USB 3.0

USB 3.0, выпущенный 12 ноября 2008 года, произвел революцию в отрасли. Он представил гораздо более высокоскоростную шину со скоростью передачи данных до 5 Гбит/с (в дополнение к существующим режимам скорости передачи) и более высокую выходную мощность (900 мА по сравнению с 500 мА в предыдущих версиях). Более того, он был обратно совместим с USB 2.0, что обеспечивает возможность взаимодействия. Эта версия USB известна как SuperSpeed.

Порты USB 3.0 Gen 1

Стандарт USB 3.0 был заменен USB 3.1 в 2014 году. Скорость передачи данных в USB 3.1 Gen 2 (SuperSpeed ​​+) была увеличена до 10 Гбит/с. Одним из важных изменений, выдвинутых стандартом USB 3.1, стала замена их предыдущей схемы кодирования 8b/10b на более эффективную 128b/132b, вариант кодирования 64b/66b (который преобразует 64-битные данные в 66-битный линейный код). Это значительно снижает накладные расходы на кодирование, что приводит к сравнительно более высоким эффективным скоростям передачи данных.

Следующий стандарт USB 3.2 был выпущен в 2017 году. Как и ожидалось, он ввел новый, гораздо более быстрый режим передачи, сохранив при этом все существующие режимы. Это позволило кабелям USB-C (поддерживаемым 3.1) работать в 2 раза быстрее их начальной скорости (от 5 Гбит/с до 10 Гбит/с для кабелей USB-C 3.1 Gen 1 и от 10 Гбит/с до 20 Гбит/с для кабелей Gen 2). Позже мы поговорим о кабелях USB-C.

USB4 или USB 4.0

Последний стандарт USB, USB4 (или USB 4), расширяет существующие возможности кабелей USB-C, обеспечивая максимальную доступную пропускную способность USB. Он основан на протоколе Thunderbolt, который предлагает расширенные функции, такие как двунаправленная передача данных (отправка и получение данных с обоих концов), данные по двойному протоколу и передача видео по одному кабелю с низкой задержкой.

USB4 совместим с Thunderbolt 3 и обратно совместим со спецификациями USB 2.0 и USB 3.2. Он поддерживает максимальную скорость передачи данных 40 Гбит/с. В существующих кабелях USB-C эти скорости достигаются за счет двухполосной работы, когда две полосы в кабеле передают данные одновременно.

Базовый процессор Intel 11-го поколения Tiger Lake — первый продукт, поддерживающий стандарт USB4 или Thunderbolt 4.

Типы USB-кабелей [в зависимости от их физической структуры]

Почти все электронные продукты, от смартфонов и небольших портативных устройств до компьютеров всех типов, теперь имеют USB-порты или поддержку USB. Однако физические характеристики USB-портов и разъемов различаются в зависимости от класса продукта.

По физическим характеристикам или компоновке кабели USB можно разделить на три типа: USB-A, USB-B и USB-C.

USB Тип-A

USB-A, пожалуй, самый популярный USB (разъем или порт), который вы можете найти на своих ПК, игровых консолях, портативных медиаплеерах и портах для зарядки смартфонов. Стандартный штекер USB Type-A имеет плоскую прямоугольную форму.

Более старые разъемы USB Type-A и порты, поддерживающие стандарт USB 2.0, имеют четыре внутренних контакта; одна пара предназначена для передачи данных, а другая — для питания. С введением стандарта USB 3.0 к оригинальной конструкции были добавлены пять дополнительных контактов, чтобы сделать новые порты и разъемы USB Type-A (SuperSpeed) более быстрыми и обратно совместимыми со старыми версиями USB.

USB Тип-B

Порты USB типа B обычно находятся на приемниках или периферийных устройствах, таких как принтеры и сканеры, которые работают с высокими скоростями передачи данных и имеют относительно больший размер (по сравнению с другими периферийными устройствами).

В большинстве случаев USB-кабель, соединяющий компьютер с принтером или сканером, имеет разъем USB типа B с одной стороны и разъем типа A с другой. Хотя они обычно имеют двойное назначение, некоторые порты типа B допускают передачу питания только от хоста.

Существует две версии USB Type-B. Оригинальный разъем USB Type-B имеет квадратное сечение со слегка наклоненным верхним внешним ободком. Он поддерживает скорость передачи данных до 480 Мбит/с (USB 2.0).

Разъем USB 3.0 Type-B

Улучшенная версия разъема Type-B, Type-B SuperSpeed, была представлена, чтобы сделать их совместимыми со стандартом USB 3.0. Кабели Type-B SuperSpeed ​​со скоростью передачи данных более 5 Гбит/с идеально подходят для подключения ПК с внешними жесткими дисками и аудиоинтерфейсами.

USB Mini и Micro типа B

Разъем USB Micro-B

Разъемы Mini-USB были впервые введены в 1998 году для электронных устройств, таких как ранние смартфоны и планшетные компьютеры. В то время как разъемы Mini-A уже давно сняты с производства, Mini Type-B по-прежнему поддерживается небольшим количеством устройств.

Разъемы Micro-USB разработаны специально для современных портативных устройств, таких как смартфоны и фотоаппараты, которые намного тоньше ранних устройств. Толщина разъема Micro-USB почти вдвое меньше, чем у Mini-USB.

USB-C-это отраслевой стандарт для высокоскоростной передачи данных и питания, который в настоящее время используется на все большем числе устройств, включая новейшие смартфоны, внешние твердотельные накопители и дорогие ноутбуки.

Разъем USB-C сначала может показаться похожим на разъем Micro-USB, поскольку оба имеют изогнутые края, хотя разъем USB-C немного толще и шире.

Пожалуй, наиболее важной и желанной особенностью разъемов USB-C является возможность переключения. Это означает, что разъемы USB-C не имеют ориентации вверх или вниз (как в случае с разъемами USB-A и USB-B). Их можно каждый раз правильно вставлять, не переворачивая.

Еще одним преимуществом кабелей USB-C является то, что они несут ток не менее 3 А при 60 Вт. Кабели USB-C на USB-C предназначены для передачи более высокого тока 5 В.

Кабели USB-C на основе стандарта USB 3.1 имеют максимальный предел передачи данных 10 Гбит/с. Старые кабели, поддерживающие USB 2.0, могут передавать только до 480 Мбит/с.

USB OTG

USB On-The-Go или OTG — это спецификация USB, которая позволяет определенным устройствам выполнять роли как хоста, так и приемника. Например, с помощью OTG смартфон может считывать данные как хост при подключении к цифровой камере или флеш-накопителю, но действовать как приемник при подключении к главному компьютеру.

Что в будущем?

Есть популярная поговорка, что «ничто не вечно», и в мире технологий это не может быть более точным. Хотя порты и кабели Type-A и Type-B по-прежнему широко используются, USB-C готов заменить их в ближайшем будущем.

Порт USB-C на MacBook

Самые последние порты USB-C поддерживают протокол Thunderbolt 3, который обеспечивает максимальную скорость передачи данных до 40 Гбит/с. USB4, который еще не вышел на массовый рынок, стандартизирует скорость Thunderbolt 3.

Высокая пропускная способность данных и питания позволяет разъемам USB-C напрямую подключаться к нескольким аудио- и видеоинтерфейсам без использования каких-либо адаптеров. К ним относятся устройства MHL (Mobile High-Definition Link), HDMI и DisplayPort.

С 2014 года все большее количество электронных устройств, включая смартфоны, материнские платы ПК/ноутбуков и внешние жесткие диски, стали поддерживать USB-C. Двусторонние кабели USB-C, которые подключаются как к хосту, так и к приемнику, быстрее и эффективнее, чем старые разъемы Type-A и Type-B.

Растущая экосистема USB-C означает, что вам скоро потребуются поддерживаемые порты и разъемы для передачи данных и зарядки ноутбуков. Хотя Apple была первой компанией, которая представила порты USB-C на своих устройствах, они все чаще встречаются на других массовых устройствах. В дорогих ПК и ноутбуках есть как минимум один порт USB-C.

Источник

Источник

Смотреть что такое USB в других словарях:

USB

USB: übersetzungUniversal Serial Bus* * *
USB [u:|ɛs’be:], der; -[s], -s [Abk. für engl. Universal Serial Bus] (EDV):Leitung zur Datenübertragung, die … смотреть

USB

USB: translation
USB USB noun [countable usually singular] COMPUTING universal serial bus a part of a computer to which you can connect … смотреть

USB

(Universal Serial Bus) универсальная последовательная шина, шина USB стандарт, предложенный в 1995 г. консорциумом из семи ведущих компьютерных и телекоммуникационных фирм (Compaq, IBM, Intel, NEC, Micrisoft, Digital, Northern Telecom) для обмена данными по недорогой шине между ПК и среднескоростными периферийными устройствами. Подключение устройства не требует перезагрузки компьютера, переконфигурирования системы или установки интерфейсной карты. Распознавание устройства и установка соответствующего драйвера выполняется компьютером автоматически без вмешательства человека. К одному порту USB можно последовательно присоединить до 127 устройств, длина кабеля — до пяти метров, скорость пересылки данных — 12 Мбайт/с. USB-кабель содержит четыре провода: два — витая пара, питание 5 В и общий провод. Таким образом, через него можно запитывать маломощные устройства. Поддерживается технология plug and play, а также «горячая» замена. Развитие стандарта — разрабатываемый Intel с 1999 г. более быстрый совместимый с предыдущей версией стандарт USB 2.0, обеспечивающий пропускную способность до 480 Кбайт/с см. тж. EHCI, FireWire, IRQ, parallel port, SCSI, serial port… смотреть

USB

тех. сокр.Universal Serial BusУниверсальная последовательная шина. Позволяет подключать до 127 устройств. Поддерживает «горячее» подключение, схватывая… смотреть

USB

• ___ port (computer outlet) • Acronym for computer ports • Common port type • Computer port found in the four longest answers • Data transmission let… смотреть

USB

Интерфейс, предназначенный для подключения к компьютеру внешних носителей, в число которых входят и MP3-плееры. Поддерживается т. н. «горячее подключение», предусматривается возможность автоматического распознавания, настройки и подзарядки периферийных устройств.
<p class=»tab»>Шина, предназначенная для последовательного шлейфового подключения к компьютеру периферийных устройств, которая поддерживает «горячее» подключение, автоматическое распознавание и настройку оборудования. Физически USB представляет собой две соединенные пары проводов для передачи данных в обоих направлениях.</p>… смотреть

USB

USB — Стандарт шины (см. Bus), а также универсальный разъем на задней панели компьютера, предназначенный для подключения целого ряда внешних устройств — принтеров, сканеров, мониторов, клавиатуры, мыши и т. д. Допускает «горячее» подключение устройств, без отключения и перезагрузки системы, а также «цепное» подключение, при котором первое устройство подключается к USB-разъему компьютера, второе — к USB-разъему первого и т. д. Поддержка USB имеется практически во всех современных платах<br><br><br>… смотреть

USB

Universal Serial Bus — универсальная последовательная шина — последовательный интерфейс передачи данных для среднескоростных и низкоскоростных периферийных устройств<br><p class=»src»><em><span itemprop=»source»>Словарь бизнес-терминов.<span itemprop=»author»>Академик.ру</span>.<span itemprop=»source-date»>2001</span>.</span></em></p>… смотреть

USB

USB — Universal Serial Bus — высокоскоростной последовательный интерфейс (до 12 Мбит/с, устанавливаемый на компьютерах класса Pentium и выше.[Энциклопе… смотреть

USB

USB: translation noun
USB is used before these nouns: ↑device, ↑keyboard, ↑socket

USB

сокр. от universal serial busуниверсальная последовательная шина

USB

(Universal Serial Bus) универсальная шина последовательной передачи данных

USB

сокр. от Universal Serial Bus универсальная последовательная шина

USB

(universal serial bus) —
• универсальная последовательная шина

USB

Universal Serial Bus универсальная последовательная шина

USB

USB: translationupper side band

USB

див. «Universal Serial Bus»

USB 1.1

обмін даними із швидкістю до 12 Мбіт/сек

USB 2.0

USB 2.0: übersetzungHighSpeed USB

USB 2.0

обмін даними із швидкістю до 480 Мбіт/сек

USB 3.0

USB 3.0: übersetzungSuperSpeed USB

USB PORT

порт универсальной последовательной шины (напр. в УЧПУ)

USB (UNIVERSAL SERIAL BUS)

Интерфейс, предназначенный для подключения к компьютеру внешних носителей, в число которых входят и MP3-плееры. Поддерживается т. н. «горячее подключение», предусматривается возможность автоматического распознавания, настройки и подзарядки периферийных устройств.
<div class=»tab»>————————————</div><p>
</p><p class=»tab»>Шина, предназначенная для последовательного шлейфового подключения к компьютеру периферийных устройств, которая поддерживает «горячее» подключение, автоматическое распознавание и настройку оборудования. Физически USB представляет собой две соединенные пары проводов для передачи данных в обоих направлениях.</p>… смотреть

Источник

Всего найдено: 5

Добрый день,
подскажите,
1) нужен ли дефис в словах типа РЧ-сигнал, УВЧ-спектр?
2) Как более грамотно: USB-порт, или порт USB?
3) Нужен ли дефис при переводе таких иностранных названий, как, например, San Martin Street (Сан-Мартин-Стрит)?

Ответ справочной службы русского языка

1. Дефис нужен.

2. Лучше: порт USB.

3. Да, дефис нужен.

добрый день!
Уточните, пожалуйста, где ставится ударение во множественном числе USB-пОрты или USB-портЫ

Екатерина

Ответ справочной службы русского языка

Предпочтительно: USB-пОрты.

как писать USB кабель, слитно, через дифис или раздельно? тоже самое USB порт?
как писать стерео наушники, стерео система, слитно или раздельно?

Ответ справочной службы русского языка

Правильно: USB-кабель, USB-порт, стереонаушники, стереосистема.

Добрый день. Хотелось бы узнать, как правильно написать «мини-USB-порт«. Все через дефис? Или раздельно? Очень надеюсь на ответ.

Ответ справочной службы русского языка

Да, корректно написание с двумя дефисами. Вы написали верно.

Скажите, пожалуйста, нужна ли запятая перед союзом «И»:

Если вы используете съемный диск, вставьте дискету в дисковод, а съемный диск в разъем USB-порта, и нажмите кнопку «Диск».

Спасибо!

Ответ справочной службы русского языка

Запята перед _и_ не нужна.

Источник

Понравилась статья? Поделить с друзьями:
  • Как пишется юрочка или юрачка правильно
  • Как пишется юрой или юрай
  • Как пишется юродивый или юродевый
  • Как пишется юрист правовед
  • Как пишется юрист консульт